Panasonic HC-V785 Operating Instructions Manual page 111

3
Change the mode to
≥ When this unit and the TV are connected with the HDMI micro cable (supplied) or an AV cable
(commercially-available) in any of the following situations, no image will be displayed on the TV.
Use the LCD monitor of this unit.
j When recording a motion picture in HDR Movie Mode or during PRE-REC
j When [HDMI RESOLUTION] is set to [576p] in HDR Movie Mode
j FULL HD Slow Motion Video Mode
j When recording a motion picture with [Backup for Twin Camera] set to [ON] or during
PRE-REC
j When saving the Highlight Playback scene or a manually edited scene
j When performing [CONVERT TO MP4]/performing [Slow Speed Conversion]
≥ If you connect this unit to the TV when this unit is set to Recording Mode, a squealing sound
be output. Before connecting this unit, set it to Playback Mode.
* The microphone may pick up the sound from the speakers, producing an abnormal sound.
≥ When connected to the TV, sound in Playback Mode is not output from this unit. Also, since the
volume cannot be adjusted with this unit, adjust the volume of the TV.
≥ Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.
≥ Image and audio is not output from this unit while using the Wi-Fi function.
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] # [4:3]
MENU
Example of images with a [16:9] aspect ratio
on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
The recorded pictures can be played back on a TV with an SD Memory Card slot
≥ It may not be possible to play back scenes on the TV depending on the [REC FORMAT] or
[REC MODE].
≥ For details on how to play back, please read the operating instructions for the TV.
to play back.
∫ To display the on-screen
When the menu setting is changed, the
information displayed on the screen (operation
icon and time code etc.) can be displayed/not
displayed on the TV.
desired setting
[SIMPLE]
[DETAIL]:
[4:3]
[OFF]:
* This setting is only available in Motion Picture
- 111 -
information on the TV
: [SETUP] # [EXT. DISPLAY] #
MENU
*
:
Recording Mode or Still Picture Recording
Mode.
*
Information partially
displayed
Detailed information
displayed
Not displayed
may