Electrical safety: how to use, maintain and charge the • Only use batteries and chargers product. supplied by Gtech. • Do not charge the battery pack outside. • Never modify the charger in any way. • Before charging check the power •...
• After prolonged use or in high temperatures the battery may become warm. Allow the product to cool for 30 minutes before charging. • Use only with recommended Gtech battery. • Leaks from battery cells can occur under extreme conditions. If the liquid gets on your skin wash immediately with soap and water.
Thank you for choosing Gtech “Welcome to the Gtech family. I started Gtech to create sensible, easy to use products that do a great job, and hope you get many years of trouble-free performance from your new product.” Nick Grey –...
Installing and removing the battery To install, simply insert the battery pack. Make sure the latch on the battery snaps in place and battery pack is secured to the tool. To remove, depress the latch..and pull out the battery pack. 4617_Flip_Light_manual_aw.indd 5 4617_Flip_Light_manual_aw.indd 5 28/10/2020 16:44...
Page 6
Adjusting the position of the light The light can be positioned through 180º Full the lamp fully forward to find the This can be flipped out. hanging hook 4617_Flip_Light_manual_aw.indd 6 4617_Flip_Light_manual_aw.indd 6 28/10/2020 16:44 28/10/2020 16:44...
The lamp can also be sat upright Once the hook has been deployed the light can be angled accordingly. Operation To switch on press the green button. Press a There is an adjuster on the lens to turn the second time for full brightness and third time beam from wide to narrow.
Charging the battery To charge the battery, line up the slot of the The battery indicator light should turn from battery with the slot of the charger and slide green to red when the battery is charging. into place. The charger is sold separately. When the indicator light has turned green the battery should be fully charged.
Maintenance Your product requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner, we recommend the work light to be completely discharged every one month and fully recharged again .Only store with a fully charged battery and top-up the charge from time to time if stored for a long time (we recommend the work light to be completely discharged every three month and fully recharged again).
300 Lumens High 150 Lumens Low WARRANTY – REGISTRATION Visit www.gtech.co.uk/warrantyregistration to register your product to ensure that we have all the information required to provide you with quick and efficient support. You will need your product’s serial code. X-XX-XXX~...
If your product is within its warranty and has a fault that cannot be resolved from the troubleshooting section or online support, please do the following: • Contact our Gtech Customer Care Helpline on UK: 08000 308 794, who will go through any troubleshooting with you to identify the fault.
Need help?
Do you have a question about the CTL001 and is the answer not in the manual?
Questions and answers