Partron PWE-100 Manual

English
Partron Connect
iOS APP Download
CE Compliance Information
Partron Bluetooth Headset hereby declares that this PWE-100 is in compliance with the essential requirements of the
RE Directive 2014/53/EU of 16. April 2014
FCC Compliance Information
FCC ID : 2AD5K-PWE-100
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: This device may not cause
harmful interference, and this device must accept any interference received, including interference that may cause undesired
operation. FCC Part 15.21 Any Changes or modifications (including the antennas) to this device that are not expressly approved
by the manufacturer may void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be colocated or operated in conjunction with any other antenna or transmitter.
Information to the user:
NOTE : This equipment has been tested and found to comply with limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If this equipment causes
harmful interference to radio or television reception, can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION TO USER : Changes or modifications not expressly approved by the party reasonable for compliance could void
the user's authority to operate the equipment.
Contents
PWE-100 User Manual
/ Package Contents /
Earbud Tips
(Small / Medium / Large)
Quick Guide
Charging Cable
/ Description of Parts /
/ Product Specifications and features /
Standby Time
Operating Time (Music)
Operating Time(Call)
Charging Time
Battery
Working Distance
Supported profiles
Decoder
Bluetooth Version
Power Consumption
Frequency Band
※ Above mentioned operating times based on connected devices or surrounding
environment.
/ How to use /
1. Power On / Off
Power On
- Press the button for 2 seconds
- The purple LED light flashes for 0.5 seconds and a voice guide announces
that the power is turned on.
Power Off
- Press the button for 4 seconds
- The purple LED light flashes for 0.5 seconds and a voice guide announces
that the power is turned off.
2. Battery Charging
Charging case(LED indicator)
- When the charger is connected to the cradle, the Red LED is on.
- When charging is completed, the LED is off.
Earbuds(LED indicator)
- When the earbud is inserted into the cradle, the red LED lights up.
- When the earbud is normally charged, the LED turns off.
※ When the charger is connected, the headset will be disconnected from the device.
Recommendations
- Using an USB Hub may take extra charging time due to the low current.
For fast charging, please use a 5V 500mA ~ 5V 1A rated charger.
※ It takes approximately 2 hours to charge the device if the battery is totally empty.
3. Low Battery Alarm & Alert
- The red LED light flashes 30 minutes with the vocal guidance "Battery not enough" if the
battery will not last longer than one hour.
4. Critical Battery
- Power is turned off with the voice guidance "Battery Empty" at the critical battery state.
5. Pairing
Before using the headset for the first time, you must pair it with a Bluetooth-enabled device.
* Pairing: Connecting Bluetooth-enabled device and headset.
※ If you connect one of two earbuds to a mobile phone, the device will operate as MASTER
and another will operate as SLAVE.
- If you keep one of the two earbuds pressed for 4 s econds while the power is off
"Pairing starts." Enter the pairing mode with the audio guide.
- The headset will automatically enter the waiting mode if it is not connected within 10 minutes.
(The power is automatically turned off after 50 minutes in waiting mode)
- On the device you want to have paired, find the Bluetooth menu and search & select
"PWE-100" from the list of nearby device.
- If connected without any problem, the headset will be paired accompanied by the audio
guide "Connected"
- Once the pairing is complete, the devices will be automatically paired afterwards.
( ※ If PIN code is required, please enter "0000".)
6. Connecting Earbuds (Peer Mode)
- If you press two earbud buttons that are turned off at the same
time for 8 seconds, "Peer starts." Enter the Peer Mode with the
announcement voice and the connection is completed with the announcement
tone within 10 seconds .
7. Call Answer / Call End / Call Reject
※ Call function is available only for Master Earbud.
Call Answer / Call End
- Briefly press the Master Earbud button to answer the incoming call.
- Briefly press the Master Earbud button to end the call.
Call Reject
- Press Master Earbud button for 2 secens to reject the incoming call.
8. Call Transfer
- During the call, press the
from headset to mobile phone.
- Press Master Earbud
mobile phone to earset.
9. Setting Waiting Mode while Calling
Setting Waiting mode
- During the call, briefly press MASTER earbud Call button twice to put the call on hold.
Press Call button twice again to return to the call.
※ To put the call on hold, your mobile phone must support this function.
Incoming second call while calling
- Briefly press MASTER earbud Call button to end the original call and answer the second call.
- Briefly press MASTER earbud Call button twice to answer the second call without hanging up
the original call (Original call will be put on hold)
Ending a Call
- Briefly press the MASTER earbud Call button.
Truly Wireless Earbuds
PWE-100
PWE-100 Earbud
LED
200 hours (Slave)
6 hours
6 hours
2 hours (±30mins)
Lithium Ion Battery 3.7V Earbud (60mAh),
Lithium Polymer Battery 3.8V Charging Case (500mA)
10m
HFP / HSP / A2DP / AVRCP
SBC, APT-X, AAC
Version 5.0
0.5W
2.4GHz ISM Band (2.4000GHz ~ 2.4800GHz)
Master Earbud
button for 2 second again. The audio will be transferred from
5.0
Partron Connect
Android APP Download
Package Contents
Description of Parts
Product Specifications and Features
How to use
Power on/off
Charging
Pairing
Connecting Earbuds (Peer mode)
Calling
Transferring a Call
Music Play / Multi-Connection
Auto Pariring
Using Partron Connect Application
Button Functions and Status Information
Precautions
Product Warranty and Service
Limited Warranty
Product Warranty Certificate
※ The components of the package are subject to
change without notice to improve the product
performance or quality.
PWE-100 earbuds
Charging Case
LED
Play / Pause / Call
Mic
button for 2 second. The audio will be transferred
Charging Case
4
5
6
7
7
7
9
10
10
11
12
14
15
16
18
19
20
21