Table of Contents
Advertisement
_______________________________________________________________________________________________________________________________________________________
Hook-up when using an unipolar motor with 6 wires:
Connect the stepper motor card according to the diagram.
Connect a DC or AC voltage to the card, equal to the motor rating. (Mini-
mum voltage: 7 Volts). The maximum current the power supply will have to
deliver is the sum of the motor current + 200 mA (consumed by the card).
GND
SCL
SDA
FROM
K8000
12
UNIPOLAR MOTOR (6-WIRES)
0,5 A / Coil Max.
DEPENDING ON MOTOR
L
MAINS
7...28V/1.5A max
N
M4
M3
M2
M1
GND
AC
AC
GND
SCL
SDA
JU
MOUNTED
K8005
Advertisement
Table of Contents
