Table of Contents
Advertisement
Quick Links
Vortex Mixer
Instruction Manual
Cleaver Scientific Ltd
41 Somers Road Industrial Estate
Rugby, Warwickshire
Tel: +44 (0) 1788 565 300
Fax: +44 (0) 1788 552 822
Rev. 1.0, January 2010
Introduction
The Cleaver Vortex Mixer is a general purpose laboratory vortexer. Mixing speed is adjustable
up to 3,400rpm. A three position switch allows the mixer to be operated continuously or by
"touch" activation. The shaking mechanism is specially designed to offer enhanced stability
Advertisement
Table of Contents
Summary of Contents for Cleaver Scientific CSLVORTEX
- Page 1 Vortex Mixer Instruction Manual Cleaver Scientific Ltd 41 Somers Road Industrial Estate Rugby, Warwickshire Tel: +44 (0) 1788 565 300 Fax: +44 (0) 1788 552 822 Rev. 1.0, January 2010 Introduction The Cleaver Vortex Mixer is a general purpose laboratory vortexer. Mixing speed is adjustable up to 3,400rpm.
- Page 2 under various loads. The metal baseplate and rubber feet provide additional stability and prevent the unit from “walking” across the bench, even at maximum speed. Read this manual thoroughly before attempting to operate the Vortex Mixer. All persons operating this piece of equipment should review the Safety Precautions section of this manual. Specifications Speed Range 200-3400rpm (120V)
- Page 3 The speed control, located on the right side of the panel, is continuously adjustable. Oscillating speed increases at a non-uniform rate to a maximum of 3,400rpm as the knob is turned clockwise. Before turning on the mixer, set the speed control to the minimum. To begin operation, move the power switch to either the TOUCH or ON position and turn the speed control to the desired setting.
- Page 4 Any damage resulting from improper packaging is the responsibility of the customer. A written explanation should accompany the unit along with the RA number. Cleaver Scientific Ltd 41 Somers Road Industrial Estate Rugby, Warwickshire CV22 7DH Tel: +44 (0) 1788 565 300 info@cleaverscientific.com...
Need help?
Do you have a question about the CSLVORTEX and is the answer not in the manual?
Questions and answers