Before using this product, leggere attentamente le istruzioni che seguono. read the present instructions carefully. Spotlight srl non potrà essere ritenuta responsabile di Spotlight srl will not be responsible for damage danni derivanti dalla non osservanza di dette istruzioni. resulting from instructions not being followed.
Page 3
Profile LED Hyperion 300 TW Connessioni elettriche e DMX - Electrical and DMX connections DMX IN CONSOLE DMX THRU DMX IN DMX THRU DMX IN 100-240V DMX THRU Fig. 2 Dimensioni (mm) e peso - Dimensions (mm) and weight Profi le Standard Zoom (ZS) 14,4 kg Profi...
Profile LED Hyperion 300 TW DESCRIZIONE DEL PROIETTORE CONNESSIONI ELETTRICHE Il vostro faro è stato progettato per una tensione di Riferendosi ai disegni di pag. 2: alimentazione da 100 a 240V, 50/60 Hz. ① Staffa di sospensione Prima e durante l’installazione osservare le seguenti ②...
Profile LED Hyperion 300 TW MODALITA' DI FUNZIONAMENTO LEGENDA Il faro è predisposto per poter essere utilizzato in diverse SETUP modalità di funzionamento: SETTINGS BACK • POTENZIOMETRO LOCALE DMX SETTINGS PREV • DMX (Wireless opzionale) OPTIONS • RDM NEXT INFO...
Profile LED Hyperion 300 TW ( * ) MENU OPTIONS LED Boost La funzione Boost permette di avere circa un 20% in Voce Valori Descrizione più di fl usso luminoso, ma è compatibile solo con una Tempo di ritardo impostazione della funzione FAN MODE in modalità AUTO.
Page 7
Profile LED Hyperion 300 TW MODALITA' DMX Ventola da velocità MINIMA a STANDARD Il modo dmx è selezionabile dal menu DMX SETTINGS. 0..255 (valori in Volt impostabili in menu Segue l’elenco dei modi dmx con la descrizione dei Factory Setting) canali.
Page 8
Profile LED Hyperion 300 TW SERVICE - Modalità di salvataggio della COLOUR CANALE ADVANCED STROBE CALIBRATION valido in tutte le modalità DMX in cui è previsto Nome Valore DMX 1. La colour calibration è disponibile solo per la modalità dmx FULL 16bit STROBO NON ATTIVO 2.
Page 9
Profile LED Hyperion 300 TW CANALE SERVICE valido in tutte le modalità DMX in cui è previsto Il presente dispositivo supporta il protocollo RDM, ultima versione (ANSI E1.20 - 2010). Vengono supportati i Name DMX Value seguenti parametri: 0..5 INACTIVE 6..11...
Profile LED Hyperion 300 TW DESCRIPTION OF THE LUMINAIRE ELECTRICAL CONNECTIONS The luminaire has been designed to operate with a 100V Referring to fi gures on pages 2-3: to 240V supply, 50-60Hz. ① Suspension yoke Before and during the installation, make sure you follow ②...
Page 11
Profile LED Hyperion 300 TW OPERATING MODE LEGENDA The luminaire is designed to be used in different SETUP operating modes: SETTINGS BACK • LOCAL POTENTIOMETER DMX SETTINGS PREV • DMX (Wireless optional) OPTIONS • RDM NEXT INFO ENTER LIGHT OUTPUT CONTROL DEPENDING ON THE By pressing the SETUP button you access the menu setup.
Page 12
Profile LED Hyperion 300 TW MENU OPTIONS LED Boost The Boost function allows about a 20% increase in light Item Value Description output, but it is exclusively compatible with the FAN Delay time on LED MODE function setting in AUTO mode.
Page 13
Profile LED Hyperion 300 TW DMX MODE Fan from MINIMUM to The DMX mode can be selected from the DMX SETTINGS STANDARD speed menu. The DMX mode list with the description of the (values in Volts can be set in the channels will follow.
Profile LED Hyperion 300 TW SERVICE - COLOUR CALIBRATION saving mode ADVANCED STROBE CHANNEL valid in all the DMX modes where it is foreseen 1. The colour calibration is available only for the dmx FULL 16bit mode Name DMX Value 2.
Page 15
Profile LED Hyperion 300 TW SERVICE CHANNEL valid in all the DMX modes where it is foreseen This fi xture supports the RDM protocol, latest version (ANSI E1.20 - 2010). The following parameters are Name DMX Value supported: 0..5 INACTIVE 6..11...
Page 16
Profile LED Hyperion 300 TW Spotlight s.r.l. Via Sardegna 3 20098 S. Giuliano Milanese Milano - Italy Tel. +39.02.98830.1 Fax +39.02.98830.22 E-mail: info@spotlight.it www.spotlight.it...
Need help?
Do you have a question about the Profile LED Hyperion 300 TW and is the answer not in the manual?
Questions and answers