Advertisement
2.2 If preset recording, then the DVR will perform repeat recording at preset interval and duration. For
instance, if interval is set to 01:00:00(1hr) and duration is set to 10sec, then the DVR will start
recording every one hour for 10sec. Preset interval can be any from 00:00:00 to 23:59:59, duration
from 10s, 30s, to 1Min
2.2.1
Interval setting: Use LF/RT to select HH, MM, SS, UP/DN
key to change digit.
2.2.2
Duration setting: use UP/DN key to select
2.2.3
Turn on-off the interval recording: use UP/DN to select
2.3 User can select either one schedule. If it has been set to Motion
Detect On in security setting, this schedule is therefore turn off
3. Image Quality:
3.1 If set JPEG, can set mega-pixel or VGA, Default mega-pixel, press
LF/RT to toggle, UP/DN to save and leave to other item
3.2 If set AVI, can set frame rate 10fps, 15fps, 30fps, default 10pfs. Use
LF/RT key to toggle
Security Setting
1
Trigger input on/off: to turn on off the trigger input, use LF/RT to select,
UP/DN to confirm and leave
2
Alarm output on/off: to turn on off the alarm output, use LF/RT to select,
UP/DN to confirm and leave
3
Motion Detect in/off, to turn on off the motion detect function, LF/RT to
select, UP/DN to confirm and leave
4
Motion Detect setup: to set the motion detect items such as the area,
sensitivity and capture properties
4.1
Area setting, the whole area is divided to 5x5 grids, user can
select whole or any of 25 grids. By default it is selected the whole
area, use OK to confirm un-select that grid, use LF/RT/UP/DN
key to move other grid, press mode or menu key to save and quit.
A green rectangle will be displayed to indicate that the area is not
active.
Motion Detect
Area Set
Sensitivity
Capture Property
Exit
5
Sensitivity Set up
There is a red bar on the left hand side of screen, use UP/DN key to select sensitivity. The higher the dial,
the higher sensitivity.
Rev 070625
Sensitivity set up
Image Quality
JPG SXGA/VGA
AVI 10/15/30fps
Exit
Security Setting
Trigger In On/OFF
Alarm Out On/ OFF
Motion Detect ON/OFF
Motion Detect Set
Exit
Capture Property
JPG / AVI
SXGA / VGA
10fps 15fps 30fps
10s 30s 60s
Exit
6
Advertisement
