Brainlab 19902 Quick Start Manual

EN
3D Display Cart
General Information
This document describes the connection of the 3D Display Cart
to the following Brainlab devices for the intended use of 3D
stereoscopic viewing:
• Buzz 1.0
• Curve 1.1
• Planning Station 7
• Kick 2
NOTE: 3D Display Cart is also compatible with non-Brainlab
platforms in combination with Origin Server 1.x or 2.x or an
Elements installation on third party hardware.
Components
The 3D Display Cart comprises:
• 55" 3D/4K display
• Mobile cart
• Four pairs of 3D glasses
• HDMI-HDMI cable
• DVI-to-HDMI cable
• HDMI-to-DP adapter
• Power cable
• Power cable adapter (North America)
For information on these components, refer to the original
equipment manufacturers' instructions for use.
How to Connect to Buzz
Attach the DVI-to-HDMI cable to Display Out 2 on Buzz.
1.
NOTE: If needed, you can use Display Out 3 or 4, but you
must reboot Buzz after connecting.
2. Connect the cable to HDMI 1 on the 3D display.
Press the 3D button on the remote control to activate 3D
3.
stereoscopic viewing.
4. If needed, select line-by-line 3D mode for the display.
How to Connect to Buzz 2
1. Attach the HDMI-to-DP adapter to Display 2,3 or 4 on
Buzz 2 MCU.
2. Attach the HDMI cable to the adapter.
3. Connect the cable to HDMI 1 on the 3D display.
How to Connect to Curve 1.1 / Curve 1.2
Attach the HDMI-to-DP adapter to Display Out on Curve.
1.
2. Attach the HDMI cable to the adapter.
3. Connect the cable to HDMI 1 on the 3D display.
How to Connect to Kick 2
Attach the DVI-to-HDMI cable to Video Out port on Kick 2.
1.
2. Connect the cable to HDMI 1 on the 3D display.
3. Press the 3D button on the remote control to activate 3D
stereoscopic viewing.
4. If needed, select line-by-line 3D mode for the display.
Recommended Display Settings
The display is installed with the recommended settings selected.
If settings were changed or viewing looks incorrect, check that
the recommended settings are selected.
Brainlab AG Customer Support:
Olof-Palme-Str. 9 support@brainlab.com
81829 Munich North/ South America: +1 800 597 5911
Germany Europe & Rest of the world: +49 89 99 15 68 1044
19902
Picture:
Feature
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
Colour Temperature
Advanced Control:
Feature
Dynamic Contrast
Dynamic Colour
Preferred Color:
Skin Colour
Grass Colour
Sky Colour
Colour Gamut
Super Resolution
Gamma
Picture Options:
Feature
Noise Reduction
MPEG Noise Reduction
Black Level
Real Cinema
Motion Eye Care
LED Local Dimming
TruMotion
Other:
Feature
Aspect Ratio
Page 1/2
Feature
Setting
3D Settings
Standard or Standard (User)
3D Mode
100 3D Depth
100
3D Viewpoint
50
Normal Image View
10 Dual Play
50
Energy Saving
0
HDMI Ultra HD Deep Colour:
C20 HDMI 1:
HDMI 2:
Programs:
Setting
Feature
Off
Off My Channels/My
Programmes
HbbTV (if available)
0
Electrical Safety Testing
0
0
Standard
For sustained safety of the equipment, an electrical safety
test according to IEC 62353 is required.
Low
NOTE: Alternatively, the test can be performed according to IEC
Low
60601-1. Local regulations and requirements that vary from this
standard take precedent.
Electrical safety testing must be performed as follows:
Setting • After connection to a Brainlab system:
a.
b.
Off
• Annually:
Off
a.
b.
Low
c.
d.
Off (if editable)
Off
To ensure safety, tests must be performed in the above
Off
order.
Off
Setting
Just Scan
Setting
On
Manual
10
0
Off
Off
Off
Off
Off
Setting
Off
Off
Touch current for ME (medical electrical) systems
Document results
Visual inspection
PE resistance
Equipment leakage current
Document results
BL-IL-60960-79EN Rev. 2.0
*60960-79EN*