CHAPTER 3 SETUP
3.1 Setup Procedure When Turning On the Power for the First Time
3.1.1 Setting up Windows
This section describes the procedure for setting up the preinstalled Windows
• This procedure covers setup for the basic items of Windows
• RAS features are automatically set up.
• The setup procedure takes about 20 minutes.
● Preparing for setup
The following items are required during the setup procedure. Prepare or check them before starting the setup
procedure. In addition, perform the setup procedure indicated in this section by using the hardware configuration
from the time that the equipment was shipped.
License certificate
User name
Password
®
10 2016 LTSB
Verify that the license certificate is attached to the body of the computer.
The user name for the administrator account of the computer.
This can be changed later from the Control Panel.
The user password.
This can be changed later from the Control Panel.
3-1
®
10 2016 LTSB operating system.
®
10 2016 LTSB.
3. SETUP