Lubricant Specifications - Mazda 2002 B2300 Owner's Manual

5
Traction-Lok axles use 2.2–2.4L (4.75–5.0 pints) of rear axle lubricant.
Add 118 ml (4 oz.) of Additive Friction Modifier meeting Mazda
specifications for complete refill of Traction-Lok axles.
Service refill capacities are determined by filling the rear axle 6 mm to
14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole.

LUBRICANT SPECIFICATIONS

Item
Front axle (4X4)
Rear axle
Brake fluid and clutch fluid (if
equipped)
Door weather strips
Engine coolant
Engine oil 2.3L I4 and 3.0L V6
engines
Engine oil 4.0L V6 engines
Hinges, door checks, latches,
striker plates, fuel filler door hinge
and seat tracks
Transmission /steering/parking
brake linkages and pivots, brake
and clutch pedal shaft, clutch pilot
bearing and input shaft spline
(manual transmission).
Power steering fluid, transfer case
fluid (4X4) and transmission fluid
(manual)
Automatic transmission (5R44E
and 5R55E)
Windshield washer fluid
Maintenance and Specifications
Mazda part name or equivalent
SAE 80W-90 Premium Rear Axle
Lubricant
SAE 80W-90 Premium Rear Axle
1
Lubricant
High Performance DOT 3 Motor
Vehicle Brake Fluid
Silicone Lubricant
Mazda Premium Engine Coolant
SAE 5W-20 Premium Synthetic
Blend Motor Oil
SAE 5W-30 Super Premium Motor
Oil
Multi-Purpose Grease
Premium Long-Life Grease
MERCON ATF
MERCON V ATF
Ultra-clear Windshield Washer
Concentrate
2
275