Cala INFLATABLE User Manual

ACCESORIES
Repair Kit Inflatable Pump
OPERATING INSTRUCTIONS
W A R N I N G !
BEWARE OF OFFSHORE WINDS AND CURRENTS!
• Get informed on local regulations and hazards.
• Learn about the area you are paddling in. Ask locals about tides and currents.
• Before using the product check it carefully.
• Be careful that you do not over estimate your skill level.
• Be aware that weather and water conditions can change instantly.
• Always wear a Personal Flotation Device.
• Dress appropriately for the water temperature.
• Be prepared for an emergency carry water, food and a drybag with dry clothes. • Do not
over exceed the weight capacity of your board.
• The board should avoid contact with sharp objects and harmful chemicals.
• Do not leave children unattended on a stand up paddleboard.
• Keep children away from the backpack danger of suffocation.
• Be prepared to have fun!
REPAIR KIT
HOW TO REPAIR SMALL PUNCTURES
You can repair small punctures with the
included repair kit. Please note that in order for
the repair to be successful, the humidity level
should be less than 60%, temperature between
65°F/77°F or 18°C/25°C. Make sure the SUP is
fully deflated and lies flat.
1. Draw the shape of the patch exactly where it
will be applied, cut a round patch at least 2" / 5
cm larger than the cut/damaged area.
2. Clean the damaged area and the correspon-
ding side of the patch with an alcohol based
grease remover and allow it to dry for 5 minutes.
3. Apply 3 thin layers of glue on both the patch
and the damaged area, let it dry for 5 minutes
between layers until the glue is tacky.
4. When the third layer of glue is tacky, apply the
patch lightly and adjust the positioning if
needed. Press the patch down and remove any
air bubbles that may have under the patch by
smoothing the patch with a round object such as
a spoon. Do this by starting in the center of the
patch and moving towards the outside, clean
the excess glue with a solvent. Dry for 12 hours.
Travel Bag 3-Piece Paddle Removable Fin
Repair Case PVC Patches Repair Glue
W A R N I N G !
• Perform all of your repairs in a well-ventilated area. Avoid
inhaling glue vapors or swallow- ing. Avoid contact with the
skin or the eyes.
• Keep all repair materials (glue, solvents, etc.) away from
children.
N.B. the repairs on the weldings must not be glued. Only
the manufacturer of the SUP can perform the repairs on the
weldings.
W A R N I N G !
Your product is designed in accordance with the standards
for a specific use. Any modifications, transformations or
use of a motor horse power higher than indicated by the
manufacturer could result in serious risks for the user and
will void the warranty.
INFLATABLE USER MANUAL
www.calaboards.com I info@calaboards.com
Congratulations on your purchase of a Cala inflatable stand up paddle board.
This manual will provide you with all the information you need to get your board
on the water quickly and safely. The instructions provided include information
on how to inflate/deflate the board, fin attachment, how to store the board and
care and maintenance.
W A R N I N G !
Follow the instructions carefully to prevent injury or damage to your board.
Safety precautions must be followed to prevent injury, product damage, or
property damage. It is the owner's responsibility to make sure that all users will
carefully read and follow the manual and instructions for the safe operation of
this Cala inflatable stand up paddle board. Observe all local and national laws.
Always wear a coast guard approved Personal Flo- tation Device. Follow the
weight limit approved for your inflatable board.