Subscribe to Our Youtube Channel
Summary of Contents for MAGIC FX FX-ARM CONTROLLER
- Page 1 USER AND INSTALLATION MANUAL ENGLISH FX-ARM CONTROLLER. ® PART01338 PART01882 CO2 FX CONTROL GEAR rev 01-00 rev 01-01...
-
Page 2: Disclaimer
LIABILITY MAGIC FX accepts no liability for claims from third parties arising from unauthorised use, use other than that stated in this manual, and use other than in accordance with the General Conditions registered at the Chamber of Commerce. -
Page 3: Table Of Contents
Main parts Product identification Technical data Accessories Arm safely! General safety rules Connecting FX-machines Precautions for operation Let’s Arm! Connect the controller Emergency stop Maintenance Troubleshooting Correct disposal EC Declaration of Conformity MAGICFX FX-ARM CONTROLLER — User and Installation Manual ®... -
Page 4: Foreword
FOREWORD Congratulations! You have bought a great new product from MAGIC FX. This manual contains all information required for the intended use of the equipment. Deviation from the described intended use can result in a hazardous situation and/or property damage. -
Page 5: Meet The Magicfx ® Fx-Arm Controller
FX-ARM CONTROLLER. ® The MAGICFX FX-ARM CONTROLLER does not replace the use of either DMX or 12-24V ® control of your FX-machine. It is an independent safety circuit that works alongside your separate control solution to increase the safety of your system. -
Page 6: Technical Data
Control Options Manual Technical data ACCESSORIES Code Product Included SPR90050 Key for FX-COMM4NDER and FX-ARM CONTROLLER (pair) MFX0313 Schuko to Neutrik powerCON TRUE1 - cable 1.5 m ® Accessories Please contact MAGIC FX for additional possibilities. MAGICFX FX-ARM CONTROLLER — User and Installation Manual... -
Page 7: Arm Safely
ARM SAFELY! The MAGICFX FX-ARM CONTROLLER has been designed and constructed in such a ® manner that it can be used safely. This applies to the use, the circumstances and the regulations as described in this documentation. Reading this documentation and... -
Page 8: Let's Arm
Likewise, do not connect any RJ45 cables from any other system carrying a different data protocol as this may damage your hardware. Only one MAGICFX FX-ARM CONTROLLER can be used in a ® WARNING single connected system. Connecting more than one controller with RJ45 Arm leads can cause damage to them. - Page 9 EtherCON ARM IN ARM OUT The MAGICFX FX-ARM CONTROLLER can be placed either at the ® NOTICE end of the safety cable line or anywhere within a linked system using the Arm Input and output connectors on the machines.
-
Page 10: Arm
Make sure the e-stop is released when trying to activate the e-stop reset button. Set the arm/disarm key in the ‘ON’ position. The FX LED Indicator lights up red. MAGICFX FX-ARM CONTROLLER — User and Installation Manual ®... - Page 11 When you are done with firing the FX-machine, set the arm/disarm key to the ‘OFF’ position to deactivate the FX-machines. The FX LED indicator turns off on the FX-ARM CONTROLLER. MAGICFX FX-ARM CONTROLLER — User and Installation Manual ®...
-
Page 12: Emergency Stop
Wait for danger to be averted, then reset the arm controller by the following steps. Release the e-stop with a clockwise quarter turn. The e-stop reset button will be illuminated white. MAGICFX FX-ARM CONTROLLER — User and Installation Manual ®... -
Page 13: Maintenance
Do not replace parts yourself; always consult MAGIC FX. DANGER TROUBLESHOOTING Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved with the instructions as described in this manual. CORRECT DISPOSAL This symbol on the product and / or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. -
Page 14: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY DECLARA T ION OF CONFORMIT Y According to Annex III A Machinery Directive 2006/42/EC MAGIC FX B.V. declares as manufacturer and composer of the technical construction file that the product with the following specifications: Name machine... - Page 16 WWW.MAGICFX.EU...
Need help?
Do you have a question about the FX-ARM CONTROLLER and is the answer not in the manual?
Questions and answers