Table of Contents
Advertisement
EN
Set the Date:
Press the
(Down) button for 2 seconds to start.
01.
Use the
02.
Use the
03.
Use the
Press the
04.
Set Alarm Time:
01.
Press
or
blinking. when the alarm icon and alarm time are blinking, press
the
to set hour and
be set when it stops blinking.
When the alarm is on, the unit will sound and the connected
02.
shaker will shake for 45-seconds, then stops for a 5-minute
snooze period. This snooze pattern will repeat for up to one (1)
hour. Press and hold the RESET button for 2 seconds to stop the
snooze function.
Note: SHAKER-1 and SHAKER-2 output jack corresponds to
Alarm-1 and Alarm-2 individually, but BOTH jacks will be active
during alerts.
Speaker Volume
Press the
button to change the spealer volume level off – Low –
High. The speaker icon on the bottom left corner indicates the
volume level.
Flasher Light Control
Locate the button on the back labeled "Light Control". Pressing this
button will change the light intensity of the flasher. Press repeatedly
to set the desired intensity.
13.
or
buttons to change Year, then press MODE.
or
buttons to change Month, then press MODE.
or
buttons to select Day, then press MODE.
button once will momentarily display the date.
button until the alarm icon and alarm time start
to set minute. The new alarm time will
www.sereneinnovations.com
Advertisement
Table of Contents
