Table of Contents
Advertisement
Important
Installation Instructions
1. To avoid a hazard due to
instability of the appliance, it must
be fixed in accordance with the
instructions.
2. Do not operate this appliance
unless installed to furniture.
3. The appliance should be
located on a smooth surface. The
four front and back feet can be
adjusted as required. To ensure that,
your appliance is standing upright
adjust the four front and back feet by
turning clockwise or anti-clockwise,
until the product is in firm contact
with the floor. Correct adjustment of
feet avoids excessive vibration and
noise.
4. Refer to «Cleaning and Care»
section to prepare your appliance for
use.
To avoid any loss in performance, air
channels should not be obstructed.
Minimum distance between the wall
and the appliance must be at least 10
mm.
5. The appliance must be
protected against rain, moisture and
other atmospheric influences.
Important:
Care must be taken while cleaning
/ carrying the appliance to avoid
touching the bottom of the condenser
metal wires at the back of theappliance
as you might injure your fingers and
hands
Important:
This appliance is not designed for
stacking with any other appliance.
When positioning your appliance,
take care not to damage your flooring,
pipes,wall coverings etc.
11
EN
Advertisement
Table of Contents
