Page 1
User Manual P R O F E S S I O N A L A U D I O POWER CONDITIONER PC PLUS II Made in Taiwan RACK LIGHTS DIMMER PC-PLUS II UNiK A UNSWITCHED AC IN RESET 12V LAMP...
Page 2
PC-PLUS II INTRODUCTION We congratulate you on choosing UNiKA PC-PLUS II power conditioner. This series is designed for easy use and incorporate the latest advances in power technology, along with useful and innovative features. Please read all instructions carefully before operating.
Page 3
PC-PLUS II REAR PANEL AC IN RESET 12V LAMP MAX LOAD 120V 60Hz 15A Made in Taiwan 420mA 10. AC Power Cord - Plug this cable into a standard 110V or 220V wall outlet. Be sure that the supplied voltage in your area matches the unit's required voltage. Never plug your power conditioner into a wall outlet that does not match its required voltage which helps to avoid serious damage may occurred on the unit.
Page 4
PC-PLUS II OPERATION LAMPS The PC-PLUS II power conditioner with easily pull-out LED light pipes and may be aimed to provide the best illumination for your equipment. You should set the front rack lights switch to the OFF position if not using the lights for an extended period of time. AC POWER SWITCH The PC-PLUS II power conditioner has a master AC POWER switch for the rear outlets.