Advertisement
Quick Links
Read this manual carefully before use, and retain it for future reference.
Product Overview
Mi 20W Wireless Car Charger is a wireless charger for use in cars. With being
convenient for one-handed use, it offers smart identification and control,
flexible inductive sensing, 2.5D glass surface, and USB-C port. It also
supports charging phones that are featured with wireless charging.
Button
Clamp
Knob
Arm
Release Button
Indicator
Welcome Light
Inductive Sensor
Advertisement
Summary of Contents for Xiaomi Mi 20W Wireless Car Charger
- Page 1 Read this manual carefully before use, and retain it for future reference. Product Overview Mi 20W Wireless Car Charger is a wireless charger for use in cars. With being convenient for one-handed use, it offers smart identification and control, flexible inductive sensing, 2.5D glass surface, and USB-C port. It also supports charging phones that are featured with wireless charging.
-
Page 2: How To Use
How to Use 1.Use the clamp to secure the Mi 20W Wireless Car Charger onto the air vent and tighten the knob on the back. Plug in the supplied charger into the car's cigarette lighter or power port, and insert the USB-A interface into the charger's red USB port. - Page 3 3. In order to achieve a better charging performance, make sure the phone is properly placed onto the wireless car charger, so it is close to the charging surface (refer to the figure below). When the indicator blinks, it indicates that the charger is in protection mode.
- Page 4 5. When the Mi 20W Wireless Car Charger cannot be secured onto an air vent with its clamp, the supplied adhesive mount can be used to secure it onto a flat surface. Adhesive Mount Note: The surface for mounting the wireless car charger needs to be clean and flat. Make sure press and hold it firmly for 5 to 10 seconds after mounting.
- Page 5 The operating frequency for wireless charging is 110–148 KHz. The equipment should be installed at least 20 cm (7.9 in.) from your body or nearby persons. Hereby, Zimi Corporation declares that the radio equipment type Mi 20W Wireless Car Charger is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: ...
-
Page 6: Specifications
Specifications Product Name: Mi 20W Wireless Car Charger Model： WCJ02ZM Input: 5 V=3 A 9 V=2 A 12 V=2 A 15 V=1.8 A 20 V=1.35 A Output: 20 W Max.* Inductive Sensing Distance: ≤ 4 mm Operating Temperature: 0 ℃ to 40 ℃...