Advertisement
5. When the Mi 20W Wireless Car Charger cannot be secured onto an air
vent with its clamp, the supplied adhesive mount can be used to secure it
onto a flat surface.
Note: The surface for mounting the wireless car charger needs to be clean and flat. Make sure
press and hold it firmly for 5 to 10 seconds after mounting. Due to the strength of the
adhesive, forced removal may damage the car's interior. It is recommended to have a
professional to remove the adhesive mount.
Precaution
Do not strike or crush to this product.
Keep the glass surface of the inductive sensor clean.
Do not disassemble or modify the product.
Do not place the product near or in fire, nor submerge it in water.
Do not use this product in severely hot, humid, or corrosive environments so as to
avoid damage to its electrical circuit.
Do not place any cards including ID card and bank card with a magnetic strip/chip
near
or onto the wireless car charger to avoid corrupting the card.
Keep a distance of at least 20 cm between implanted medical devices (pacemakers,
cochlear implants, etc.) and the product so as to avoid potential interference to the
medical devices.
Do not allow children to touch or play with this product to avoid unnecessary
accidents.
Please unplug the car charger from the car's cigarette lighter or power port when it
will not be used for a long time.
For your user experience, it is not recommended to reuse the adhesive mount as the
strength of the adhesive will be decreased.
Adhesive Mount
Advertisement
