Subscribe to Our Youtube Channel
Summary of Contents for Sit Proflame 2
- Page 1 PROFLAME 2 BATTERY HOLDER USE AND INSTALLATION INSTRUCTIONS Read the instructions before use.
- Page 2 The Proflame 2 IFC Board can be powered by battery pack for back up (ATMO Systems only -refer to Proflame 2 IFC instruction manual) in case of mains power interruption.
- Page 3 With the slider in OFF position, the system is "OFF". No function can be selected by the transmitter. No "beep" will be emitted from the Proflame 2 IFC when a command is sent by pressing any key on the transmitter (for example the ON / OFF key).
- Page 4 When the Proflame 2 IFC batteries are low, two (2) “beeps” will be emitted from the Proflame 2 IFC every time it receives a command from the Transmitter. This is an alert for a low battery condition for the Proflame 2 IFC.
Need help?
Do you have a question about the Proflame 2 and is the answer not in the manual?
Questions and answers