LG AC18BH.NSK Owner's Manual page 26

Using the Low Heating Function
This function operates the heating system
to maintain a minimum room temperature
and prevent objects in the room from
freezing where there is no permanent
resident, such as a vacation.
, are displayed on the display
•
screen.
NOTE
• This function is available with Heating
Mode.
• During LH operation, when you press
buttons such as
Speed, and then return to Heating Mode.
• If Jet Mode button is pressed during
LH operation, this function is disabled
and Power Heating Mode is operated
immediately. (only for power heating
model)
• In case an error occurred, operation can
be interrupted for the protection of the
product.
• Comfort Air and
be used while the LH function is in
operation.
Using the Mosquito Away
Function
This function fans away mosquitos by
generating a high-frequency wave.
is displayed on the display screen.
•
NOTE
• You can use this function without turning
the air conditioner on.
• is displayed on some indoor units.
26
, Mode, Fan
,
button cannot
Swing
Using the Auto Clean Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor
unit. This function removes such moisture.
is displayed on the display screen.
•
NOTE
• Some functions cannot be used while the
Auto Clean function is in operation.
• When UVnano Function is set, Auto
Clean Function works together.
• If you turn off the unit, the fan continues
to run for 30 minutes and cleans the
inside of the indoor unit.
• is displayed on some indoor units,
depending on the model.
Using the Comfort Sleep Function
This function operates the air conditioner
automatically to make the comfortable
sleep environment.
, are displayed on the display
•
screen.
NOTE
• This function is available with Cooling
Mode.
• The vane stops swing and sets indirect
airflow angle, after 30 minutes from
start even though the room temperature
doesn't decrease to optimal temperature
to sleep.
• It is possible that a comfortable sleep
environment is different according to the
people.