Table of Contents
Advertisement
０５／１２／２１ １７：０３：５４ ３１ＳＡＡ６００ ０２１６
Turn the ignition switch to the
START (III) position. If the
headlights do not dim, check the
condition of the fuses. If the fuses
are OK, there is probably
something wrong with the
electrical circuit for the ignition
switch or starter motor. You will
need a qualified technician to
determine the problem. See
Emergency Towing
If the headlights dim noticeably or
go out when you try to start the
engine, either the battery is
discharged or the connections are
corroded. Check the condition of the
battery and terminal connections
(see page
203
). You can then try
jump starting the vehicle from a
booster battery (see page
The Starter Operates Normally
In this case, the starter motor's
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Are you using a properly coded
key? An improperly coded key will
cause the immobilizer system
on page
226
.
indicator in the instrument panel
to blink rapidly (see page
Are you using the proper starting
procedure? Refer to
Engine
on page
214
).
If the Engine Won't Start
Do you have fuel? Check the fuel
gauge; the low fuel indicator may
not be working.
There may be an electrical
problem, such as no power to the
fuel pump. Check all the fuses
(see page
If you find nothing wrong, you will
need a qualified technician to find
76
).
the problem. See
Towing
Starting the
148
.
221
).
Emergency
on page
226
.
213
Advertisement
Chapters
Table of Contents
