Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Nyos OPUS G2
Summary of Contents for Nyos OPUS G2
- Page 1 OPUS® G2 USER GUIDE Pro-Line / Slim-Line ® ®...
- Page 2 VIDEO INSTRUCTIONS STARTING THE TANK VIDEO INSTRUCTIONS EQUIPMENT INSTALLATION VIDEO INSTRUCTIONS INTRODUCING LIVE STOCK...
-
Page 3: Table Of Contents
CONGRATUL ATIONS Congratulations on your new Nyos OPUS G2 aquarium. ® ® Before putting the product into operation, please read the user guide and safety instructions carefully. CONTENTS SAFETY INSTRUCTIONS .............. 4 BEFORE ASSEMBLY ..............6 FUNCTIONALITY AND EQUIPMENT REQUIRED ......8 STARTING THE TANK .............. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS (Fig. 1) - Page 5 SAFETY INSTRUCTIONS • Read the user guide carefully and fully prior to putting the aquarium into operation. • When using electrical equipment in or in close proximity to the aquarium, observe the instructions of the respec- tive manufacturer. • With all electrical equipment, the cable must form a drip loop so that no water is able to flow along the cable in the direction of the socket.
-
Page 6: Before Assembly
BEFORE ASSEMBLY SELECTION OF THE INSTALL ATION SITE • The floor on which the OPUS G2 is installed must be ® level. • The floor on which the OPUS G2 is installed must be suf- ® ficiently load-bearing. The OPUS G2 has a base surface ®... - Page 7 BEFORE ASSEMBLY • Ensure sufficient and regular ventilation of the room. • In order to guarantee sufficient space for cables and ventilation of the cabinet, the rear side of the OPUS ® should exhibit a distance of approx. 8cm (3 in) from the wall.
-
Page 8: Functionality And Equipment Required
Chamber 2: Filter sock filters dirt particles out of the water. Chamber 3: The main filter chamber, also known as the skimmer chamber, has a constant water level. It is possible to install further filters here, such as a media reactor (Nyos TORQ ) for example. ® ®... - Page 9 (Fig. 3)
- Page 10 100W Main filter chamber INFORMATION ON THE RETURN PUMP: • The maximum pump capacity of the Nyos® OPUS® G2 return pump must not exceed 2,000 l/h (530 gph). If this is exceeded, the display tank could overflow! INFORMATION ON AUTO TOP OFF SYSTEM We recommend a separate auto top off system •...
-
Page 11: Starting The Tank
STARTING THE TANK VIDEO INSTRUCTIONS FOR STARTING THE TANK STEP 1: REEF CONSTRUCTION AND SAND: • We recommend to arrange the aqua scape whilst dry, before filling the aquarium with seawater. This is sig- nificantly easier than arranging the reef construction underwater. - Page 12 STARTING THE TANK STEP 3: ADJUSTING THE VALVE • It is now necessary to adjust the valve of the main out- flow: The valve closes through rotation in a clockwise direction. This results in the water level in the overflow box and display tank rising.
- Page 13 STARTING THE TANK STEP 4: SIMUL ATION OF POWER FAILURE • Disconnect all electrical equipment from the mains and test to ensure the sump does not overflow in the event of a power failure. There is no risk of this if the valve is correctly set.
-
Page 14: Maintenance And Care
MAINTENANCE AND CARE REFILL TANK: • The refill tank contains water for a number of days (de- pending on the ambient temperature, water temperature, etc.). Make sure there is always sufficient refill water (RODI) available, otherwise the return pump can run dry and the water exchange between the sump and display tank will be interrupted. - Page 15 MAINTENANCE AND CARE • Make sure no water is present inside the cabinet, around the sump. DISPL AY TANK: • When cleaning the panes of the display tank and sump with a scraper, make sure the blades do not damage the silicone seams.
- Page 16 Nyos Aquatics GmbH ® Siemensstr. 26 70825 Korntal-Muenchingen, Germany www.nyos.info, support@nyos.info...
Need help?
Do you have a question about the OPUS G2 and is the answer not in the manual?
Questions and answers