GMC 1996 Sonoma Owner's Manual page 14

Easy gntry Seat (Extended Cab)
The right
front
bucket or split-bench seat
of
your vehicle
makes it easy to get in and
out
of the rear vehicle area.
0
Tilt the right front seatback completely forward and
the whole seat will slide forward.
@
Move the right front seatback to its original position
after someone gets into the rear seat area. Then move
the seat rearward until it locks.
If an easy entry right front seat isn't locked, it
can move. In a sudden stop or crash, the person
sitting there could be injured. After you've used
it, be sure to push rearward on an easy entry seat
to be sure it is locked.
0
Tilt the seatback completely forward again to
get out.
Jump Seat (Extended Cab Models)
Your extended cab
pickup has a jump seat
in the rear area.
To fold the jump seat down, pull down on the handle on
the bottom of the seat until the seat is in place, then
1nove the seatback to a vertical position. To store the
seat, fold the seatback down on the cushion, then push
the entire seat up until it is flush with the trim panels.
Don't let the safety belts be damaged by the hinges or
the latches. Safety belts should be folded and stored
between the seat cushion and seatback.
1-6