Table of Contents
Advertisement
Quick Links
Instruction manual
Floating Fountain COP-10000
55562
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Table of Contents
Related Manuals for SunSun COP-10000
Summary of Contents for SunSun COP-10000
- Page 1 Instruction manual Floating Fountain COP-10000 55562 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 Introduction Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
- Page 4 Assembly 1. Insert one end of the holding rope included into the hole at the edge of the buoy (from two or three different diagonal directions). 2. Attach the other end of the rope to the holding peg. 3. To fix the product, firmly put the holding peg into the muddy edge zone of the water body. Note! When fixing, make sure that the motor is fully immerged in the water;...
- Page 5 Storage during winter 1. Take the pump out of the water. 2. Thoroughly clean it. 3. Check the pump and power cord for damage. 4. The device must be stored in a frost-free place and in a container with as much water as possi- ble.
- Page 6 Rotor Buoy Ceramic support Water filter cover Support Rotor Motor body Screw Technical specifications Model COP-10000 Intake voltage (V) 220–240 Intake frequency (㎐) Power consumption (W) Height of water column (m) Spraying radius (m) ⁄ ℓ Max. flow rate ( 20,000 275×252×420...
- Page 7 Regulations for waste disposal The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was implemented in the German law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed- out wheeled rubbish bin.
Need help?
Do you have a question about the COP-10000 and is the answer not in the manual?
Questions and answers