Fuel And Oil - PRETUL GEN-55P Manual

Fuel and Oil

Oil Supply (A)
• Set the generator in a flat and level surface.
• Turn and remove the oil tank cap.
• Fill up the tank with 4-stroke gasoline motor oil SAE
10W-30. Use a funnel.
• Set back the cap and remove to check the oil level in the
cap oil measuring rod.
• Once the tank reached the right level indicated in the
rod. Tighten the cap to prevent leaks.
CAUTION
• Do not exceed the maximum oil level
because it may produce a lot of smoke when starting the
motor.
• Check oil level before each use. If
CAUTION
necessary, add oil until the level is within the limits in the
cap oil measuring rod.
CAUTION
• Replace oil after 50 hours' operation or
each season. In very dusty or dirty conditions, it may be
necessary to change oil more often.
Fuel Supply (B)
• Set the generator in a flat, leveled surface.
• Clean and dry the area around the fuel cap.
• Remove the fuel cap.
• Using a funnel, slowly fill up the fuel tank up to the
lower part of the tank neck. Do not overfill to allow fuel
expansion and prevent spills.
• Clean any fuel spills.
• Cover the tank turning the cap until hearing a click.
• Clean all the fuel spills before starting the motor.
B
A
Maximum
Minimum
7
ENGLISH