Baninni VOLTA BNST035 Manual page 42

PUSHCHAIR MODE
3a.
Attach the harness (G) to the seat unit.
Thread the shoulder strap retainers under the webbing holders and out through the horizontal slots in the seat unit back-
rest.
G
3b.
Thread the waist strap retainers through the vertical slots in the seat unit backrest and thread the crotch strap retai-
ner through the horiztonal slot at the centre of the seat unit.
WARNING! Ensure the strap retainers are fully through and secure at the rear of the seat unit.
To remove reverse the above process.