Table of Contents
Advertisement
M41-80 Hardware Maintenance Manual
Figure 15. Removal steps of LCD unit (continued)
Remove the LCD front bezel in the direction shown by arrows 3.
Remove the screws 4. Lift the LCD panel slightly 5. Peel off the adhesive
tape and detach the connector in the direction shown by arrow 6. Then remove
the LCD panel.
When installing: Make sure that the metal connector is attached firmly.
58
Step
Screw (quantity)
M2.0 x 2.5 mm, Phillips-head, nylok-coated (4)
4
lcd to lcd cover
5
Color
Torque
Black
1.85 (1.7-2.0) kgf*cm
Advertisement
Table of Contents
