Beko B5T4923RW User Manual page 25

Filling the water tank
1 blue wing in the machine performs the
process of watering the laundry.
If the wing is on top, you can manually rotate
the drum to the lower position and fill the water.
Before using the Steamcure program, the water
in the filling container at max. Level must be
filled manually into the wing.
To remove wrinkles, tap or drinking water
should be used.
A few drops of water that may overflow from
the wing during filling will not cause any
problem.
A
WARNING !
Additives or descaling agents should not be
used.
Chemicals that can be dissolved with liquid
chemicals and liquids should not be used.
Starting the Program
The wing should be brought to the lower
position and should be filled with water up to
the marked area with the filling container. The
SteamCure program must be selected.
When you select the program, the screen time
will appear as 10 minutes. The time program is
set to the desired time by pressing the selection
button and the Start/Standy-By button is
pressed.
Dryer / User manual
For an effective odour removal,
it is recommended to operate 1-6 pieces of dry
clothing for 50 minutes.
This function does not clean clothes, it reduces
the odours and wrinkles and allows you to wear
them again.
25