Securing A Child Restraint Designed For The Latch System - Chevrolet 2010 Impala Owner's Manual

The top tether anchors are located under the covers on
the rear seatback filler panel behind each head restraint.
Be sure to use an anchor located on the same side of the
vehicle as the seating position where the child restraint
will be placed.
Do not secure a child restraint in a position without a
top tether anchor if a national or local law requires that
the top tether be attached, or if the instructions that
come with the child restraint say that the top tether must
be attached.
2-46
Accident statistics show that children are safer if they
are restrained in the rear rather than the front seat.
See Where to Put the Restraint on page 2-42 for
additional information.
Securing a Child Restraint Designed for
the LATCH System
WARNING:
{
If a LATCH-type child restraint is not attached to
anchors, the child restraint will not be able to protect
the child correctly. In a crash, the child could be
seriously injured or killed. Install a LATCH-type
child restraint properly using the anchors, or use
the vehicle's safety belts to secure the restraint,
following the instructions that came with the child
restraint and the instructions in this manual.