Sanyo CE32WN6F-C Service Manual page 7

To select the mode and service item and change data value
+ Highlight the desired adjustment mode by using the P
+ To select the adjustment item, use the P
+ To change the service data, use the Volume -(LEFT) or Volume + (RIGHT) button.
+ The data which is set in the service mode is stored into the memory IC automatically.
REGULAR mode
REGULAR
1, AGC
Adjustment No.
and Item name
Exit from the Service Mode
+ Press the RECALL button or turn off the TV set by using the Mains switch.
INITIALISATION OF MEMORY IC
To initialise the memory IC (IC803), press and hold the NORMAL
the P button on the front panel of the TV set and then turn the Mains switch Off and On. The initialisation is now
completed.
When initialised the memory IC and all of the setting data (option data and service adjustment data) stored in the IC
are reset to the default value. It is necessary to set the option settings and readjust the service adjustments listed on
page 6 and to re-tune all the channels.
or P
or P button.
38
Adjustment Data
-7-
button and then press the F/OK button.
IMAGE mode
IMAGE
1. P V-P
Adjustment No.
and Item name
button on the remote control, then press
1F
Adjustment Data
C3YZV