XTRONIC Mushroomspeaker Instruction Manual page 3

• Connect the input port of the speaker to AC adapter or computer USB port via
included micro USB cable.
• You can not remove the battery.
Operating Instructions
Matching procedure
1. After 2 seconds Long press
the button, the blue lights start fast flashing and the device enters matching status
automatically. Perform the matching procedure on the Bluetooth device. The
matching named "BT-280"
2. The detection equipment list will be displayed on the Bluetooth stereo audio
equipment. Select the device "BT-280" to perform matching, the matching
processing, the machine emits a tone and blue long-lighting state, signify the
matching is successful.
3. The last connected devices are saved in memory of the speaker, reboot the device
by short pressing the
successful matching devices automatically. If cannot connect successes, please turn
off first, then turn on and connect again.
4. When the device is connected to the Bluetooth stereo audio device and it needs
to connect to a new Bluetooth stereo audio equipment, please exit the recent
connected devices and set to [Off] mode. Then do long press the
second to enter the matching state, signify the matching is successful.
button and hearing the starting up tone, release
button every time, the device will connect to the last
button as