Advertisement
Specifications
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Assemble all parts on a smooth surface to
avoid scratching. Sort and identify all parts.
Additional tools will be necessary to assemble
the Rolling Work Seat. (Tools not included).
Page 2
Construction
Heavy-Duty Tube/Formed Steel
w/Polypropylene Tray
Finish
Green Powder Coated
Wheels
Four 10" Dia. Pneumatic Tires w/
Ball Bearing Wheels - 30 PSI
Seat Type
Bucket /Tractor Type
13-1/4" L x 17" W x 7-1/2" H
Overall Dimension
33" L x 17-1/2" W x 23" H
Tray Dimension
17" L x 15-1/2" W x 3" D
Overall Weight
30 Lbs.
Max. Weight
300 lb. (seat)
Capacity
5 lb. (tray)
For technical questions, please call 1-888-866-5797.
6. Dress properly. Do not wear loose clothing
or jewelry as they can be caught in moving
parts. Protective, electrically nonconductive
clothes and nonskid footwear are recommended
when working with this product. Wear
restrictive hair covering to contain long hair.
7. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
4. Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
5. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
2. Matching up all the predrilled holes, attach the Tray
Bracket (2) to the Frame (1), the Tray (4) and the
Reinforcing Plate (3) using the Screws (14), Small
Washers (11), Lock Washers (12), and Small Nuts (15).
Tighten hardware.
Item 91495
Advertisement
