Page 1
HEADSETS PP40 HM Electronics, Inc. Drive-thru Audio Headsets All Systems Cross reference (COM6000 with HS12 = WIQ belt-pac communicator with headset, HS6000 = Odyssey all-in-one headset,Sys6100 = ION IQ Base Station, COM6100 with HS12 = ION IQ belt-pac communicator with headset, HS6100 = ION IQ all-in-one headset, Sys6200 = EOS | HD Base Station,...
Page 2
Inspect and Replace Batteries Annually PP40A01 Batteries should be replaced every 18 to 24 months with products supplied by the original equipment manufacturer to ensure proper operation. Time required 5 minutes to prepare 10 minutes to complete Time of day Evening after closing For 24-hour restaurants: during slow period Hazard icons...
Page 3
Inspection and Cleaning Monthly PP40M01 The communicators and battery charger must be cleaned monthly to ensure proper operation. Time required 10 minutes to prepare 10 minutes to complete Time of day Evening after closing For 24-hour restaurants: during slow period Hazard icons Tools and supplies Cloth, clean, soft...
Page 4
Inspection and Replacement of Disposable Semi-Annually PP40S01 Parts The earfoam pads and other headset pieces should be replaced to provide comfort for the crewmember and to ensure proper operation. The battery charger should be checked to ensure proper operation. Time required 5 minutes to prepare 10 minutes to complete Time of day...
Page 5
(continued) Replace HS6000 inner ear pad, Replace ear foam on HS6000, slider pad and small cushion HS6100, HS6200, HS6300 (not applicable for HS6100, and/or HS12. HS6200, HS6300 and/or HS12). Remove the old ear foam if Peel off old inner ear pad. not already removed from Peel off slider pad from the Step 3.
Need help?
Do you have a question about the PP40 and is the answer not in the manual?
Questions and answers