Summary of Contents for Enabling Devices 2296
- Page 1 Bubble Column #2296 50 Broadway Hawthorne, NY 10532 Tel. 914.747.3070 / Fax 914.747.3480 Toll Free 800.832.8697 www.enablingdevices.com...
-
Page 2: Operation
A must for your sensory space! This color changing Bubble Column is perfect for your sensory room. Soothing colors and fun bubbles attract everyone. It’s easy to assemble – only 2 pieces – the acrylic trunk and base. Just add water. LED technology in the base illuminates the trunk. Colors include red, blue, green, warm white, lime, aqua and purple. - Page 3 Page No.2...
- Page 4 Next align the red arrow on the bottom side of the Bubble Tube with the unlock symbol on the base. Slide the Bubble Tube into the top of the base, and then turn the Bubble Tube clockwise into the lock position (As Shown). Page No.3...
- Page 5 Test Procedure: Before filling the Bubble Tube all the way the following test procedure should be done for water tightness is recommended. Fill the Bubble Tube up with about 3 cups of distilled water. Be careful not to spill water during this process.
- Page 6 First pick the location where the Bubble Column will be placed. Next take the wall mount bracket and place it over the top of the Bubble Column. The height placement should be where the inside ring lines up with the bottom of the Bubble Column’s tube cap. Mark your two holes for drilling the wall mounting screw anchors.
- Page 7 Fill the Tube: Before filling the Bubble Tube with Distilled water rotate the “Bubble Flow Control” knob all the way to the maximum setting or in the farthest clockwise position. Fill the Bubble Tube with Distilled water leaving between 1 to 2 inches of space from the top of the tube.
- Page 8 Take Down: Note: Take down is easiest with two people. If the Bubble Tube needs to be moved or you want to change the water and or clean the Tube you will need to drain the water out. Locate the drain tube inside the access panel on the base.
- Page 9 Page No.7...
- Page 10 Cleaning the Bubble Tube: Do not use harsh chemicals or window cleaners to clean the plastic Base and part of your Bubble Tube. Use only water to clean it. If over time the acrylic has minor scratches a cleaner such as Novus can be used. Troubleshooting: If the unit is not functioning as it is supposed to: •...
Need help?
Do you have a question about the 2296 and is the answer not in the manual?
Questions and answers