Summary of Contents for K&S KS ATS 4/25 Gasoline
- Page 1 Manual Please, read this manual carefully before use! AUTOMATIC TRANSFER SWITCH (ATS) KS ATS 4/25 Gasoline...
-
Page 2: Work Area
PREFACE Thank you for your purchase of ATS from TM Könner & Söhnen. This manual contains safety instructions, a description of the use and commissioning of the ATS and procedures for its maintenance. The manufacturer reserves the right to make changes in the product design, configuration and construction. The images and drawings in this manual are for reference only and may differ from the actual components and inscriptions on the products. -
Page 3: Specifications
Gross dimensions (LxWxH), mm 405x325x200 Net dimensions (LxWxH), mm 320x250x140 Net weight, kg GENERAL VIEW OF THE ATS UNITS KS ATS 4/25 GASOLINE Fig. 1 1. Main power indicator 2. Load connection indicator 3. Generator power indicator 4. 4. Automatic mode LED light 5. -
Page 4: Operating Procedure
Use the control cable to connect the ATS unit to the power generator; the generator must have a special connector PLEASE NOTE! for connecting the ATS. OPERATING PROCEDURE Connect the ATS unit as shown in Figs. 2-5. AUTOMATIC MODE AUTOMATIC MODE Turn the start key on the generator control panel to “ON”... -
Page 5: Wiring Diagrams
OPTION A FOR SINGLE-PHASE EXTERNAL POWER SUPPLY AND 230 V EMERGENCY ELECTRICITY OPTION A FOR SINGLE-PHASE EXTERNAL POWER SUPPLY AND 230 V EMERGENCY ELECTRICITY CONSUMERS. CONSUMERS. This option assumes that generator supported electricity consumers may be supplied from an external power grid up to 50 A or from a KS 8100iE ATSR generator up to 32 A (Fig.1 in the Annex). -
Page 6: Warranty Provisions
Fig. 4 Contact stripe for connection СONTACT STRIPES WITH WIRING DIAGRAM FOR MODEL СONTACT STRIPES WITH WIRING DIAGRAM FOR MODEL KS ATS 4/25 GASOLINE KS ATS 4/25 GASOLINE FOR SINGLE- FOR SINGLE- PHASE MAINS PHASE MAINS Fig. 5 CITY LOAD GENERATOR СITY –... -
Page 7: Warranty Does Not Cover
WARRANTY DOES NOT COVER: WARRANTY DOES NOT COVER: - Mechanical damage (cracks, paint peeling, etc.) and damage caused by the action of aggressive media, ingress of foreign objects into the product or air inlet screen, as well as damage resulting from improper storage (corrosion of metal parts). - Page 8 ANNEX Fig. 1 Fig. 2 Fig. 3 www.ks-power.de/en |...
- Page 9 CONTACTS Deutschland: DIMAX International GmbH Deutschland, Hauptstr. 134, 51143 Köln, www.ks-power.de Ihre Bestellungen Ihre Bestellungen orders@dimaxgroup.de Kundendienst, technische Kundendienst, technische Fragen und Unterstützung Fragen und Unterstützung support@dimaxgroup.de Garantie, Reparatur und Garantie, Reparatur und Service Service service@dimaxgroup.de Sonstiges Sonstiges info@dimaxgroup.de Polska: DIMAX International Poland Sp.z o.o.