VAIO Digital Studio Computer Quick Start
2
Place the remote sensor control above the set-top box's infrared port.
Attaching the remote sensor control cable to a cable or satellite set-top box
Remote sensor
control
Infrared
port
3
Attach the double-sided adhesive tape to the top of the set-top box.
4
Press the remote sensor control onto the tape, ensuring that the front edge
extends over the front of the box, as shown in the following illustration.
✍
The remote sensor unit must be visible in a line-of-sight with your remote control in
order to function properly.
58
Cable or satellite
set-top box
Adhesive
tape
Remote sensor