Sony VGC-RA716G VAIO User Manual page 47

To connect the remote sensor control
1.
Plug the remote sensor control's cable into either jack (1 or 2) located on the back of the remote sensor.
When you attach the remote control sensor to a cable or satellite set-top box, you can control the set-top box
functions with your remote control.
Connecting the rem ote sensor and rem ote sensor control
2.
Place the remote sensor control above the set-top box's infrared port.
3.
Attach the double-sided adhesive tape to the top of the set-top box.
4.
Press the remote sensor control onto the tape, ensuring that the front edge extends over the front of the box,
as shown in the following illustration.
Attaching the rem ote sensor control cable to a cable or satellite set- top box
Page 47