CamCuddle W8 User Manual

I. PRODUCT DETAILS
II. OPERATION INSTRUCTIONS
HOW TO CHARGE THE CAMERA
Please charge the camera before use it for the first time
1. Unscrew the pen at the middle, revealing the mini USB port. Insert the provided USB cable into the port
and charge the camera.
2. The indicator light (5) should be solid blue while the camera is charging. Once the battery is full, the
indicator light will start alternating between red and blue. It usually takes about 2 hours for a full charge.
HOW TO RECORD VIDEO
1. Unscrew the pen at the middle and then insert the microSD card into
the microSD card slot, in the orientation shown in the image on the
right. Make sure the indicator light is facing you.
2. Press and hold the On/Off button (1) at the top of the pen, until the
blue indicator turns on. The blue indicator light will flash two times and then turn off, as the pen starts
recording automatically. The blue indicator light will remain off while the camera is recording.
3. To stop recording, press one time on the On/Off button (1) at the top of the pen. The indicator light will
turn on and remain solid blue, as the camera is switched into the standby mode.
4. To start recording again from the standby mode, press one time on the On/Off button (1) at the top of the
pen.
Notice:
▪ When the camera is in the standby mode, if no operations are performed within 2 minutes, the camera
shuts down automatically.
CAMCUDDLE W8
VIDEO SHOOTING PEN USER MANUAL