Table of Contents
Advertisement
Assembly Instructions / A100-H
4 Installing the turbocharger / 4.2 Fitting threaded rods
4.2
Fitting threaded rods
Fig. 5: Fitting threaded rods onto the bracket
1. Lightly oil the surfaces of the threaded rods (02) to be screwed in.
2. Screw the threaded rods into the bracket with the aid of locknuts (01).
3. Remove nuts (01) again.
Requirements for the threaded rods
Fig. 6: Requirements for threaded rods
Product
Threaded rod
A130-H
Ø 16 / M16
A135-H
Ø 20 / M20
A140-H
Ø 24 / M24
Table 5: Requirements for threaded rods
Fastening material, scope of delivery
The threaded rods and nuts for fastening the turbocharger on the bracket are not included
in the ABB scope of delivery.
The clamping nuts are included in the ABB scope of delivery.
© Copyright 2020 ABB. All rights reserved.
Diameter
Material
DIN / ISO 898
[mm]
(Part 1)
10.9 / 12.9
10.9 / 12.9
10.9 / 12.9
HZTL455311P0004_EN
Thread length
Length of
L1 [mm]
threaded rod
L2 [mm]
≥ 30
≥ 30
≥ 70
410 ... 420
Rev.B
250
325
July 2020
Advertisement
Table of Contents
