CONTENTS Safety Instructions Product Introduction and Product Overview Product Assembly and Use Panel Introduction Maintenance and Disassembly Before Contacting Customer Service Product Specifications and Company Info...
Safety Instructions Prohibited Attention Before using, check the AC adapter and This product is for home and office use. its plug for damage. To avoid poor contact, Do not use it for other purposes. do not twist or pull the AC adapter. Before using, please check if the voltage on your Turn off the power before pulling out the plug.
Product Introduction and Product Overview Product Introduction Remote Remote Control with Control AC Adapter Battery (CR2032) Magnetic Stand User Manual & Machine Body Pedestal Screw + Hex Key Wrench Warranty Card Product Overview Circulation Fan Circulation Fan Rear Guard Front Guard Control Panel Circulation Fan Blades...
Product Assembly and Use Product Assembly Before using, please follow the steps below to assemble the product and keep the packaging materials properly for future storage use. Assembling the pedestal Insert the column into the center hole of the pedestal, attach the pedestal screw onto the pedestal and then use the included hex key wrench to tighten the screw.
Page 8
Product Assembly and Use Installing the remote control battery Close Open Open Install Close 1. Gently press the button 2. Place the battery such 3. Place the battery case on the left side and pull that the positive pole (+) back into the slot and fix down the battery case to faces upwards.
Panel Introduction Machine control panel 10-12 Power On/Off Left and Right Swing Mode You can use this button to power on/ Allow you to set the product to swing left off the product. and right. Press this button again to stop swinging.
Page 10
Panel Introduction Power On/Off Remote control panel You can use this button on the remote control to power on/off the product. Left and Right Swing Mode Press this button on the remote control to set the machine to oscillate horizontally. Press this button again to stop the oscillation.
Maintenance and Disassembly Maintenance The product only requires general external cleaning (as shown). Do not use thinners, toluene, acid agents, lamp oil, alcohol or chemical wipes to clean the product to avoid discoloration or degradation. Use neutral kitchen detergents to clean. Then use clean, soft cloth to wipe.
Before Contacting Customer Service If you find a problem with the product, please check the following tips before contacting customer service. Problem Possible Cause Solution The power supply unit may not be Make sure that the power supply unit is The product fails to start.
AC Adapter Specifications Rated voltage/rated frequency 100-240V–50/60Hz Output voltage DC24V⎓ The appliance is only to be used with the power supply unit provided with the appliance. The appliance must only be supplied at safety extra low voltage. Company Info www.acerpure.com...