1. Manuals
  2. Brands
  3. EXPO Manuals
  4. Wine Cooler
  5. Teca
  6. Service manual

EXPO Teca Service Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Teca
E X P O S R L • To r i n o • I TA LY
Rev. 03/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Teca and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EXPO Teca

Summary of Contents for EXPO Teca

  • Page 1 SERVICE MANUAL Teca E X P O S R L • To r i n o • I TA LY Rev. 03/2021...

  • Page 2: Door Removal/Replacement

    All service and repair operation must be carried out by qualified personnel. Before any operation, unplug the cabinet. A. OPENING THE TECHNICAL CHAMBER 1. Remove fittings in the lower part of the 2. Remove fittings in the lower part of the 3.
  • Page 3 C. EXTRACTION OF REFRIGERATING SYSTEM (FOLLOW POINTS A, B FIRST) 1. Remove top by releasing aluminium corner 2. Remove closing guard over middle panels. 3. Through the gap over the middle panels, profiles and profile closing caps (if present, release anchoring screws between the upper depending on model).
  • Page 4 13. Release the screws fixing the condensate 14. Cut the insulating mat and remove tray. 15. Remove fixing on condenser probe. collection tray. 16. Cut the compressor’s supply cable from 17. Undo 4 fixings situated on the corner of the 18.

  • Page 5: Led Replacement

    E. LED REPLACEMENT (FOLLOW POINT A FIRST) 1. Find LED cable to replace and disconnect 2. Pull LED from cable through the opening on 3. Slide it inside the profile until it matches from power supply/controller. the chamber and insert new LED. other LEDs in height.

  • Page 6: Temperature Controller Replacement

    G. TEMPERATURE CONTROLLER REPLACEMENT 1. Remove the temperature controller’s 2. Remove the temperature controller’s 3. Remove the temperature controller’s faceplate: Teca B – Dune. faceplate: Teca. faceplate: Teca M 4. Release the two fixing screws. 5. Slide temperature controller out.

  • Page 7: Condenser Fan Replacement

    I. INTERNAL FANS REPLACEMENT 1. Unscrew and remove fan guard. 2. Disconnect cable from faulty fan. 3. Separate fan from guard and replace with new one. J. CONDENSER FAN REPLACEMENT (FOLLOW POINT A FIRST) 1. Cut fan supply cable. 2. Release the dedicated screw situated on the 3.
  • Page 8 K. DOOR LOCK REPLACEMENT (FOLLOW POINT B FIRST) 1. Remove top by releasing aluminium corner 2. Remove closing guard over middle panels. 3. Through the gap over the middle panels, profiles and profile closing caps (if present, release anchoring screws between the upper depending on model).

Table of Contents