Advertisement
3. SPECIFICATION
Model No:. . . . . . . . . . . . . . . . . .VEN200.V4 . . . . . . . . . . . . . . . . . . VEN250.V2 . . . . . . . . . . . . . . . . . . . . . . . VEN300.V3
Power: . . . . . . . . . . . . . . . . . . . . .180W . . . . . . . . . . . . . . . . . . . . . . 300W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500W
Supply: . . . . . . . . . . . . . . . . . . . .~50Hz to 230V . . . . . . . . . . . . . . . ~50Hz to 230V . . . . . . . . . . . . . . . . . .~50Hz to 230V
Fan Diameter: . . . . . . . . . . . . . . .200mm . . . . . . . . . . . . . . . . . . . . . 250mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300mm
Fan Speed: . . . . . . . . . . . . . . . . .2800rpm . . . . . . . . . . . . . . . . . . . . 2800rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . 2800rpm
Airflow: . . . . . . . . . . . . . . . . . . . .25m³/min(883cfm). . . . . . . . . . . . . 45m³/min(1590cfm) . . . . . . . . . . . 65m³/min(2225cfm)
Static Pressure:. . . . . . . . . . . . . .3.1mbar . . . . . . . . . . . . . . . . . . . . 3mbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9mbar
Noise Level: . . . . . . . . . . . . . . . .61dB(A) . . . . . . . . . . . . . . . . . . . . 66dB(A). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61dB(A)
IP Rating: . . . . . . . . . . . . . . . . . .IP55 . . . . . . . . . . . . . . . . . . . . . . . IP55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IP55
Replacement Ducting (5mtr):. . . .VEN200AK1 . . . . . . . . . . . . . . . . . VEN250AK1 . . . . . . . . . . . . . . . . . . . . . VEN300AK1
Replacement Ducting (10mtr) . . .VEN200AK2 . . . . . . . . . . . . . . . . . VEN250AK2 . . . . . . . . . . . . . . . . . . . . . VEN300AK2
OPERATION
3.1.
To extract air: attach the ducting (fig.1) to the inlet side of the ventilator,
ensuring a tight fit. Secure by pulling the string tight and knotting it.
Locate the other end of the ducting in the area from which you wish to
extract air.
3.2.
To ventilate: attach the ducting to the outside side of the ventilator and
locate the other end of the ducting in the area that you wish to ventilate.
NOTE:
The ducting has locating lugs attached to it; these can be used to
suspend the ducting if required.
3.3.
Connect the mains plug to a suitable electric supply.
3.4.
Move the toggle switch to start the unit; select a low or high fan speed
as required.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
fig.1
www.sealey.co.uk
VEN200.V4, VEN250.V2, VEN300.V3
Issue: 1
16/03/21
Advertisement
