Grandstream Networks GUV3060 Quick Start Manual

GUV3060
True Wireless Earbuds
Headset Components
LED Indicator
Touch Point
Microphone
LED Indicator
USB Port
Package contents
GUV3060 Charging Box
2 Extra Small Earplugs
2 Extra Large Earplugs
Quick User Guide
USB cable
Pairing Procedure
Enter Pairing Mode
Opening the top cover of the charging box
will trigger the automatic pairing mode
with both indicator lights flashing.
Note: The pairing takes about 10s and the
sound "connected" indicates its success.
Start Pairing
Start pairing
Enable "Bluetooth" function on the phone, search for "GUV3060", click to connect
and wait for the sound "connected' indicating its success.
During this process, both indicator lights will turn off first and then the blue indicator
light would turn to slow flashing.
Note: The earbuds would shut down for power saving when not connected to the
Bluetooth device for 5 minutes.
1
Charging the Charging Box
Connect the Charging Box to a powered USB
port using the USB Type-C cable.
Note: It takes about 2 hours to fully charge the
charging box and the earbuds.
Charging the Earbuds
Place the earbuds inside the Charging Box.
The magnet parts inside would adjust the
earbuds to a fit condition.
Note: It takes about 2 hours to fully charge
the earbuds.
Wireless Charging
Place the charging box on the center of the
wireless charger (not provided) as shown
in the illustration.
Note: It takes about 4 hours to fully charge
the earbuds and the charging box.
Charging Indicator Status
Item Status Indicator
Blue indicator light on
Earbuds Charging
Blue indicator light off
Fully-charged
Charging Red indicator light on
Charging
Box
Green indicator light on
Fully-charged
Low Battery Blue indicator light flashing
Level every 5 seconds
2 3