Technical Data - AEG SFB51221AS User Manual

If the advice does not lead
to the desired result, call the
nearest Authorized Service
Centre.
8.2 Replacing the lamp
The appliance is equipped
with a long-life LED interior
light.
It is strongly recommended
to use original spare parts
only.
Use LED bulbs (E14 base)
only. The maximum power is
shown on the lamp unit.
CAUTION!
Disconnect the plug from
the mains socket.
1. With your fingers, spread slightly
both sides of the transparent cover
to unhook them and detach the
cover pulling it in the direction of the
arrows.

9. TECHNICAL DATA

9.1 Technical data
Dimensions of the appliance
Height
Width
Depth
1
2
1
1219 mm
540 mm
550 mm
2. Replace the lamp with the one that
has identical characteristics and is
specifically designed for household
appliances.
3. Reassemble the lamp cover.
4. Connect the plug to the mains
socket.
5. Open the door.
Make sure that the light switches on.
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
assembly instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
Voltage
Frequency
Rising time
The technical information is situated in
the rating plate, on the external or
internal side of the appliance and on the
energy label.
ENGLISH 27
230 - 240 V
50 Hz
12 h