Sony PCV-RZ50C VAIO User Guide (primary manual) User Manual page 74

Capturing digital video from a connected digital video device
1.
Click Start on the Windows
2. Point to DVgate Plus, and then click DVgate Plus.
3. Click Cancel to close the Mode Select Guide.
4. Confirm that the Capture Mode is active. If you are in Output Mode, click Go to Capture Mode.
5.
Click DV.
6.
Select the Auto Capture tab.
7.
Review the tape's contents using Review Tape and Control external device.
8.
Select a format for the files in the Capture Settings window.
To display Capture Settings, click the Settings menu and select Capture.
9.
Click Capture.
To change the file destination folder, click Browse and locate the desired destination folder.
10. Type a working file name. By default, DVgate Plus
name.
11. Click OK.
12. Video capture begins and progress is displayed in the DV - Auto Capturing window.
13. When the capture is finished, view the results in the Auto Capture Results window.
14. Confirm the displayed contents, and click OK.
15. To save the Scene List, click Save.
16. Type in the final file name and click Save.
If you want to see your captured video using Media Center, move the files into the My Videos or the Shared Video
folders.
taskbar, and point to All Programs
®
software automatically adds a 3-digit number to your file
Page 74