ofichairs GENIOUS SMART Assembly Instructions

Assembly

1 Insert the ve castors into designated holes

at the bottom of the 5-star base. Insert the

gaslift into the center of the base. If present,

remove the plastic protective cap from the

gas lift.

2 Mount the armrests onto the seat and place

the seat onto the gaslift.

3 Mount the back rest onto the seat.

4 Repeatedly sit onto the chair, so that the

connections between the seat, gaslift and

foot tighten. Now you can adjust the chair to

your individual needs.

Caution Gaslift:

Never disassemble, puncture or open Gas spring.

Gas cylinder is under pressure.

Part

Count

Allen wrench

Screw M8x35 (backrest)

Screw M8x18,5 (armrest)

GENIOUS SMART

instructions

Assembly

Table of Contents

Do you have a question about the GENIOUS SMART and is the answer not in the manual?

Page 1 1 Insert the ve castors into designated holes at the bottom of the 5-star base. Insert the gaslift into the center of the base. If present, GENIOUS SMART remove the plastic protective cap from the gas lift. 2 Mount the armrests onto the seat and place the seat onto the gaslift.
Page 2 If present, remove the plastic protective cap from the gas lift. Illustration may vary from the actual product. / Castors / Remark The castors provided by the manufacturer are suitable for carpeted floors. We recommend for linoleum, wood, tile or stone floors our hard floor castors At first please take all parts out of the box and inspect them for possible transport loss/damage.