Table of Contents
Advertisement
2.1 PRE-INSTALLATION
1. This system works with 2.4GHz WiFi networks only.
Depending on your router model, you may need to disable
5GHz networks while connecting the NX LED Light Strip to
your WiFi network.
2. Connect the NX LED Light Strip to the smart controller by
aligning the arrows on the connectors, circled below:
Connect the other end of the smart controller to the
240V adaptor.
3. Please ensure the installation location is within range of your
WiFi router. One way to test this is to pair the NX LED Light
Strip with the NX Smart App at a location close to the WiFi
router. Then once paired, you can test different installation
locations for WiFi range.
NOTE:
• it may take 1-2 minutes for the lights to re-connect with the
WiFi network once you have relocated them.
4. To mount the NX LED Light Strip, first clean the mounting
surface, then remove the backing and press down to adhere.
3
Advertisement
Table of Contents
