Delta Dryden T2751 Manual

Delta Dryden T2751 Manual

Two handle roman tub trim
Hide thumbs Also See for Dryden T2751:

Advertisement

Quick Links

Models/Modelos/Modéles
T2751 & T4751
Series/Series/Seria
Dryden™
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
1/8" (3.17mm)
For easy installation of your Delta faucet you will need:
• To READ ALL the instructions completely before beginning.
• To READ ALL warnings, care, and maintenance information.
• To complete the deck and valve rough-in prior to installing this trim kit.
been tested to be in compliance with ASME A112.18.3 and ASME A112.18.1/CSA
dently and are integral, non-serviceable parts of the wand assembly. It also incorpo-
rates a diverter mechanism that automatically diverts to the spout mode when there is
a reduction in the supply pressure.
Para instalación fácil de su llave Delta usted necesitará:
• LEER TODAS las instrucciones completamente antes de empezar.
• LEER TODOS los avisos, cuidados, e información de mantenimiento.
• Para completar el borde y la instalación de válvulas dentro de las paredes
previa a la instalación de la llave y sus accesorios.
do, que ha sido probado para cumplir con los requisitos de ASME A112.18.3 y ASME
A112.18.1/ CSA B125.1. Este incorpora en la pieza de mano dos válvulas de reten-
son piezas integrantes que no requieren servicio. También incorpora un mecanismo
de agua se desminuye.
Pour installer votre robinet Delta facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes les instructions de nettoyage et
• Installez le corps du robinet et terminez le pourtour du bain avant de poser les
accessories de finition.
Dispositif anti-siphonnage
Douche à main Delta comporte un dispositif anti-siphonnage qui a été éprouvé et qui
est conforme aux normes ASME A112.18.3 et ASME A112.18.1/CSA B125.1. Ce
dispositif se compose de deux clapets indépendants homologués, montés en série
www.deltafaucet.com
86644
3/32" (2.38mm)
TWO HANDLE ROMAN TUB TRIM
LLAVE Y SUS ACCESORIOS PARA BAÑERA
ROMANA DE DOS MANIJAS (MANERALES)
ACCESSOIRES DE FINITION DE ROBINET
À DEUX POIGNÉES POUR BAIN ROMAIN
T2751
3/32"
(2.38mm)
-
-
?
86644
1
T4751
1/8" (3.17mm)
3/9/16
Rev. C

Advertisement

Table of Contents
loading

Summary of Contents for Delta Dryden T2751

  • Page 1 Dispositif anti-siphonnage Douche à main Delta comporte un dispositif anti-siphonnage qui a été éprouvé et qui est conforme aux normes ASME A112.18.3 et ASME A112.18.1/CSA B125.1. Ce dispositif se compose de deux clapets indépendants homologués, montés en série 86644 www.deltafaucet.com...
  • Page 2: Cleaning And Care

    été enregistré auprès de Delta Aucune garantie ne couvre les piles.
  • Page 3 Model / Modelo / Modèle T2751 RP54712 1 Red & 1 Blue Handle Button - RP54012 Not included with model Set Screw & Button Tornillo de Presión y Botón no proporcionadas con el modelo 1 rouge et 1 bleue bouton de manette - non fournis avec le modèle RP54096 Set Screw &...
  • Page 4: Maintenance

    T4738 RP40668 Diverter Assembly Ensamble del Desviador Dérivation Maintenance Model T4751 If faucet leaks from spout outlet: Shut off water supplies – If faucet does not divert water from the spout to the hand shower, check that Replace Seats and Springs (1) - RP4993.* the lift rod (1) is securely threaded into the diverter (2).
  • Page 5 T2751 T2751 T4751 T4751 3/32" (2.38 mm) 3/32 po Place bases (1) with gaskets (2) over end valves (3) and secure with locknut (4). OPTION: Use silicone under the gasket if deck NOTE: The deck and valve rough-in must be finished before is uneven.
  • Page 6 T4751 T4751 T4751 T4751 For Models T4751 Only Slide hose (1) through conical nut (2). Attach hose (1) to braided Loosen set screw (1), remove finial (2) from lift rod (3) and install metal hose (3) using gasket (4) and tighten. DO NOT install hand lift rod.
  • Page 7 T2751 T4751 Models T2751 Install handles. Be sure glide ring (1) is properly seated in bottom Turn faucet handles (1) all the way on. Turn on hot and cold water supplies of handle before installing. If either handle does not rotate in the cor- and flush water lines for one minute.
  • Page 8 T4751 T4751 For Models T4751 Only Pull hose (1) to its farthest extension and point it down into the Attach hand piece (1) to hose (2) with gasket (3) between tub. Pull the lift rod (2) up to the full on position and flush water connection.

This manual is also suitable for:

Dryden t4751T2751-ss25838

Table of Contents