VAIO Digital Studio System Reference Manual
Slide the drive holder back into the chassis so that the edge of the
holder is flush with the chassis.
Push in on the tab (A) to securely latch the holder to the chassis.
Connect the inner drive cable connector (B) to the first drive.
Connect the outer drive cable connector (C) to the second drive.
Connect the first power connector (D) to the first drive.
Connect the second power connector (E) to the second drive.
Replace the side panel (see
Reconnect the power cord to the system and then turn on your
"Replacing the Side Panel"
Disk drive holder
on page 27).