P r i m a L u c e L a b S p A
WARNING
If improperly handled, ESATTO may be damaged. Please follow the instructions below:
• Do not disassemble the unit
• Do not drop, subject to excessive impact open, or subject to electric shock any part of ESATTO.
• Do not short the electronic elements
• Do not expose to temperatures below -20°C and above +60°C
• Do not burn or incinerate any component.
• Do not expose to rain or other atmospheric effect related to water
• Do not bend, modify or force any part of ESATTO
After being manufactured in our laboratories, each ESATTO unit is tested by PrimaLuceLab technical experts to verify all me-
chanical and electronic components, then perform a calibration of the focuser so that is ready to use. If you find any malfunc-
tion, please contact us immediately (+ 39-0434-1696106 or support@primalucelab.com). Do not try to disassemble, repair or
modify the ESATTO yourself, without our written approval, in order maintain the manufacturer's warranty.
Component Identification
Package contents
Technical specifications
Controlling ESATTO with EAGLE or computer with Windows OS
Controlling ESATTO with Virtual HandPad
Controlling ESATTO with ASCOM drivers and third party softwares
Updating ESATTO firmware
Application example: ESATTO with Schmidt-Cassegrain and EdgeHD telescopes
Application example: ESATTO with refractor telescopes
Application example: ESATTO with Ritchey-Chretien telescopes
INFORMATION TO USERS
English
QUALITY CONTROL
Index
p a g e 1
E S AT T O u s e r m a n u a l
2
2
3
4
14
19
23
25
29
33
37