Sea-doo SPARK Series Operator's Manual
  1. Manuals
  2. Brands
  3. Sea-doo Manuals
  4. Toy
  5. SPARK Series
  6. Operator's manual

Sea-doo SPARK Series Operator's Manual

Hide thumbs Also See for SPARK Series:
Table of Contents

Advertisement

Quick Links

SPARK SERIES
OPERATOR'S
GUIDE
Operator's Guide
Read this Operator's Guide thoroughly. It contains important safety information. Minimum
recommended operators age: 16 years old. Keep this Operator's Guide in the watercraft.
219002220_rev1
Original Instructions

Advertisement

Table of Contents
loading

Related Manuals for Sea-doo SPARK Series

Summary of Contents for Sea-doo SPARK Series

  • Page 1 SPARK SERIES OPERATOR’S GUIDE Operator’s Guide WARNING Read this Operator’s Guide thoroughly. It contains important safety information. Minimum recommended operators age: 16 years old. Keep this Operator’s Guide in the watercraft. 219002220_rev1 Original Instructions...
  • Page 2 ® T.O.P.S. D.E.S.S. iControl SPARK SEA-DOO ® All rights reserved. No parts of this Manual may be reproduced in any form with- out the prior written permission of Bombardier Recreational Products Inc. ©Bombardier Recreational Products Inc. (BRP) 2021 BRP Inc.
  • Page 3 K K N N O O W W B B E E F F O O R R E E Y Y O O U U G G O O B B a a s s i i c c R R u u l l e e s s f f o o r r S S a a f f e e P P W W C C O O p p e e r r a a t t i i o o n n Know Before You Go: Basic Rules For Safe PWC Operation Improper operation can result in severe injury or death.
  • Page 4 KNOW BEFORE YOU GO A A v v a a i i l l a a b b l l e e L L a a n n g g u u a a g g e e s s Dieses Handbuch ist möglicherweise in Ihrer Landessprache Deutsch verfügbar.
  • Page 5 T T A A B B L L E E O O F F C C O O N N T T E E N N T T S S G G E E N N E E R R A A L L I I N N F F O O R R M M A A T T I I O O N N F F O O R R E E W W O O R R D D .
  • Page 6 TABLE OF CONTENTS P P R R E E - - R R I I D D E E I I N N S S P P E E C C T T I I O O N N ..............................4 4 6 6 What to Do Before Launching the Watercraft ..........46 What to Do After Launching the Watercraft ..........51 R R E E G G U U L L A A R R M M A A I I N N T T E E N N A A N N C C E E .
  • Page 7 TABLE OF CONTENTS Water-Flooded Engine ................96 Towing the Watercraft in Water..............96 M M A A I I N N T T E E N N A A N N C C E E I I N N F F O O R R M M A A T T I I O O N N M M A A I I N N T T E E N N A A N N C C E E S S C C H H E E D D U U L L E E .
  • Page 8 TABLE OF CONTENTS Indicator Lights and Message Display Information ......... 148 Beeper Code Information ..............151 W W A A R R R R A A N N T T Y Y B B R R P P L L I I M M I I T T E E D D W W A A R R R R A A N N T T Y Y – – U U S S A A A A N N D D C C A A N N A A D D A A : : 2 2 0 0 2 2 2 2 S S E E A A - - D D O O O O P P E E R R - - S S O O N N A A L L W W A A T T E E R R C C R R A A F F T T .
  • Page 9 TABLE OF CONTENTS 9. CONSUMER ASSISTANCE ............174 M M A A I I N N T T E E N N A A N N C C E E R R E E C C O O R R D D S S ............................1 1 7 7 5 5 C C U U S S T T O O M M E E R R I I N N F F O O R R M M A A T T I I O O N N P P R R I I V V A A C C Y Y I I N N F F O O R R M M A A T T I I O O N N .
  • Page 10 TABLE OF CONTENTS This page is intentionally blank...
  • Page 11 G G E E N N E E R R A A L L I I N N F F O O R R M M A A T T I I O O N N...
  • Page 12 W W A A R R N N I I N N G G Sea-Doo personal watercraft dealers ready to provide the parts, service or I I n n d d i i c c a a t t e e s s a a p p o o t t e e n n t t i i a a l l h h a a z z a a r r d d accessories you may require.
  • Page 13 FOREWORD products previously manufactured. Due to late changes, some differen- ces between the manufactured prod- descriptions and/or specifications in this guide may occur. BRP reserves the right at any time to discontinue or change specifications, designs, features, models or equip- ment without incurring any obligation upon itself.
  • Page 14 FOREWORD This page is intentionally blank...
  • Page 15 S S A A F F E E T T Y Y I I N N F F O O R R M M A A T T I I O O N N SAFETY INFORMATION...
  • Page 16 B B E E F F O O R R E E Y Y O O U U G G O O A A p p p p l l i i c c a a b b l l e e B B o o a a t t i i n n g g L L a a w w s s W W A A R R N N I I N N G G Check boating laws applicable to the D D i i s s r r e e g g a a r r d d i i n n g g a a n n y y o o f f t t h h e e s s a a f f e e t t y y...
  • Page 17 BEFORE YOU GO complete wet suit or dry suit. Not only R R e e q q u u i i r r e e d d E E q q u u i i p p m m e e n n t t will it make your ride more comfort- As the owner of the watercraft, you able, but it may delay or protect you...
  • Page 18 G G E E T T F F A A M M I I L L I I A A R R W W I I T T H H T T H H E E P P W W C C The performance of this watercraft S S t t e e e e r r i i n n g g may exceed the performance of other...
  • Page 19 These modifications and equipment Please consult your BRP authorized have not been tested by BRP and Sea-Doo dealer to see if this acces- may create hazards. For example, sory is available for your model. they could:...
  • Page 20 GET FAMILIAR WITH THE PWC – Create a loss of control and in- crease risk of crash – Cause overheating or short circuits increasing the risk of fire or burn injuries – Affect the protection features pro- vided by the vehicle. Your vehicle may also become illegal to ride.
  • Page 21 R R I I D D E E S S A A F F E E L L Y Y R R i i d d i i n n g g w w i i t t h h P P a a s s s s e e n n g g e e r r ( ( s s ) ) The operator is responsible to inform and protect the passenger(s) invited to ride.
  • Page 22 RIDE SAFELY Scan constantly for people, objects and other watercraft. Stay far enough away from others so you can always safely coast to a stop. Avoid aggressive operation, sharp turns, and unexpected acceleration that can cause riders to be thrown off. Avoid riding in very rough waters or practicing extreme manoeuvres like jumping wakes or waves - jumping can cause injuries such as back or spinal injuries (paralysis).
  • Page 23 RIDE SAFELY K K n n o o w w t t h h e e W W a a t t e e r r s s Know the waters in which the watercraft is to be operated. Current, tides, rapids, hidden obstacles, wakes and waves, etc., can affect safe operation.
  • Page 24 RIDE SAFELY Carbon monoxide is a colorless, odorless, tasteless gas that may be present even if you do not see or smell any engine exhaust. Deadly levels of carbon mon- oxide can collect rapidly, and you can quickly be overcome and unable to save yourself.
  • Page 25 RIDE SAFELY W W a a t t e e r r s s p p o o r r t t s s ( ( T T o o w w i i n n g g w w i i t t h h t t h h e e P P W W C C ) ) 3 3 –...
  • Page 26 RIDE SAFELY H H a a n n d d S S i i g g n n a a l l s s 5 5 . . C C u u t t m m o o t t o o r r 1 1 .
  • Page 27 RIDE SAFELY Always store tow rope when not in use. While some watercrafts are equipped or can be fitted with a specially designed towing mechanism, avoid installing a tow pole on a PWC. It can become a hazard should someone fall on it. SAFETY INFORMATION...
  • Page 28 P P R R A A C C T T I I C C E E S S E E X X E E R R C C I I S S E E S S It is always a good idea to practice S S t t e e e e r r i i n n g g a a n n d d A A v v o o i i d d i i n n g g a a n n O O b b s s t t a a c c l l e e and get familiar with all controls, func- Practice obstacle avoidance (choose...
  • Page 29 F F U U E E L L I I N N G G F F u u e e l l i i n n g g P P r r o o c c e e d d u u r r e e Fuel is flammable and explosive under certain conditions.
  • Page 30 FUELING – Inspect frequently for the presence of fuel leaks or other fuel system abnor- malities if you suspect the presence of alcohol in gasoline exceeds the cur- rent government regulations. – Alcohol blended fuels attract and hold moisture which may lead to fuel phase separation and can result in engine performance problems or engine damage.
  • Page 31 T T R R A A I I L L E E R R I I N N G G I I N N F F O O R R M M A A T T I I O O N N A Sea-Doo cover can protect the...
  • Page 32 The labels illustrated on the following pages are on your watercraft. If missing or damaged, they can be replaced free of charge. See an authorized Sea-Doo dealer. N N O O T T E E : : In the event of any discrepancy between this guide and the vehicle, the safety la- bels on the vehicle have precedence over the labels in this guide.
  • Page 33 IMPORTANT ON-PRODUCT LABELS 1. General Warning Label 2. Fuel Warning Label 3. Checking Engine Oil Label 4. Disconnecting Coil Label 5. Battery Label 6. Coolant Hot - Do Not Open Label 7. Tip Over Label 8. Do Not Use for Storage 9.
  • Page 34 Never ride after consuming Read Operator’s Guide alcohol or drugs. Watch safety video. (https://www.sea-doo.com/owners/safety/safety-video.html) Patents : www.brp.com/en/about-brp/patents.html RIDER SAFETY Falls Can Result in Severe Injury or Death You must wear shorts with neoprene (wet suit material) to keep water from being forcefully injected into rectum or vagina during a fall backward.
  • Page 35 IMPORTANT ON-PRODUCT LABELS F F U U E E L L W W A A R R N N I I N N G G L L A A B B E E L L 219904062 C C H H E E C C K K I I N N G G E E N N G G I I N N E E O O I I L L L L A A B B E E L L D D I I S S C C O O N N N N E E C C T T I I N N G G C C O O I I L L L L A A B B E E L L SAFETY INFORMATION...
  • Page 36 IMPORTANT ON-PRODUCT LABELS • Remove battery from boat before charging. • Do not overcharge battery. • Improper charging of battery can cause explosion. • Certain components in the engine compartment may be very hot. Direct contact may result in skin burn. 219904283 B B A A T T T T E E R R Y Y L L A A B B E E L L Heat exchanger in the hull may become...
  • Page 37 IMPORTANT ON-PRODUCT LABELS 219904576A R R E E - - B B O O A A R R D D I I N N G G L L A A B B E E L L D D O O N N O O T T S S I I T T P P I I C C T T O O G G R R A A M M i i B B R R G G a a t t e e L L a a b b e e l l - - M M o o v v i i n n g g P P a a r r t t SAFETY INFORMATION...
  • Page 38 IMPORTANT ON-PRODUCT LABELS D D o o N N o o t t U U s s e e T T o o O O n n b b o o a a r r d d C C o o o o l l a a n n t t H H o o t t - - D D o o N N o o t t O O p p e e n n L L a a b b e e l l SAFETY INFORMATION...
  • Page 39 IMPORTANT ON-PRODUCT LABELS P P a a s s s s e e n n g g e e r r T T r r a a n n s s p p o o r r t t a a t t i i o o n n - - A A p p p p r r o o p p r r i i a a t t e e W W e e a a r r i i n n g g W W A A R R N N I I N N G G –...
  • Page 40 IMPORTANT ON-PRODUCT LABELS H H a a n n g g T T a a g g C C a a l l i i f f o o r r n n i i a a P P r r o o p p o o s s i i t t i i o o n n 6 6 5 5 W W a a r r n n i i n n g g SAFETY INFORMATION...
  • Page 41 IMPORTANT ON-PRODUCT LABELS i i B B R R H H a a n n g g T T a a g g STOP INSTRUCTIONS How to brake • Squeeze brake lever. INTELLIGENT BRAKE AND REVERSE How to reverse THIRD GENERATION •...
  • Page 42 IMPORTANT ON-PRODUCT LABELS C C o o m m p p l l i i a a n n c c e e L L a a b b e e l l s s SAFETY INFORMATION...
  • Page 43 IMPORTANT ON-PRODUCT LABELS L L A A B B E E L L 1 1 S S T T A A R R L L A A B B E E L L H H A A N N G G T T A A G G SAFETY INFORMATION...
  • Page 44 IMPORTANT ON-PRODUCT LABELS CANADIAN COMPLIANCE NOTICE AVIS DE CONFORMITÉ CANADIEN MAXIMUM RECOMMENDED SAFE LIMITS LIMITES MAXIMALES DE SÉCURITÉ RECOMMANDÉES MAX. lbs/lb MAX. lbs/lb CATEGORY / CATÉGORIE: MAXIMUM WAVE / VAGUE MAXIMALE: 2.0 m MAXIMUM WIND SPEED / VITESSE DE VENT MAXIMALE: 33 knots/noeuds BOMBARDIER RECREATIONAL PRODUCTS INC.
  • Page 45 IMPORTANT ON-PRODUCT LABELS XXXXXXXXX MAXIMUM CAPACITIES CAN ICES-2 ABOVE INFORMATION ALSO / NMB-2” U.S.A. APPLIES IN THE L L A A B B E E L L 2 2 - - 2 2 U U P P M M O O D D E E L L S S - - T T Y Y P P I I C C A A L L C C A A N N A A D D I I A A N N C C O O M M P P L L I I A A N N C C E E N N O O T T I I C C E E ( ( C C A A N N M M O O D D E E L L S S O O N N L L Y Y ) ) SAFETY INFORMATION...
  • Page 46 IMPORTANT ON-PRODUCT LABELS XXXXXXXXX MAXIMUM CAPACITIES CAN ICES-2 ABOVE INFORMATION ALSO / NMB-2” U.S.A. APPLIES IN THE L L A A B B E E L L 2 2 - - 3 3 U U P P M M O O D D E E L L S S - - T T Y Y P P I I C C A A L L C C A A N N A A D D I I A A N N C C O O M M P P L L I I A A N N C C E E N N O O T T I I C C E E ( ( C C A A N N M M O O D D E E L L S S O O N N L L Y Y ) ) L L A A B B E E L L 3 3 - - T T Y Y P P I I C C A A L L SAFETY INFORMATION...
  • Page 47 IMPORTANT ON-PRODUCT LABELS EMISSION CONTROL SYSTEM INFORMATION BOMBARDIER RECREATIONAL PRODUCTS INC. THIS ENGINE CONFORMS TO U.S. EPA & CALIFORNIA EMISSIONS REGULATIONS FOR MARINE SI ENGINES. RENSEIGNEMENT SUR LE DISPOSITIF ANTIPOLLUTION CE MOTEUR EST CONFORME AUX NORMES DE L’EPA DES É.-U. POUR LES MOTEURS MARINS À ALLUMAGE COMMANDÉ. ENGINE FAMILY / FAMILLE DE MOTEUR CERTIFICATION STANDARDS NORMES DE CERTIFICATION...
  • Page 48 P P R R E E - - R R I I D D E E I I N N S S P P E E C C T T I I O O N N We encourage you to have an Annual Safety Inspection of your vehicle. Please contact an authorized BRP dealer for further details.
  • Page 49 J J e e t t P P u u m m p p W W a a t t e e r r I I n n t t a a k k e e thorized Sea-Doo dealer for servicing.
  • Page 50 PRE-RIDE INSPECTION Inspect the engine compartment for fuel vapor odor. W W A A R R N N I I N N G G S S h h o o u u l l d d a a n n y y l l e e a a k k o o r r g g a a s s o o l l i i n n e e o o d d o o r r b b e e p p r r e e s s e e n n t t , , d d o o n n o o t t a a p p p p l l y y e e l l e e c c t t r r i i c c a a l l p p o o w w e e r r o o r r s s t t a a r r t t t t h h e e e e n n g g i i n n e e .
  • Page 51 PRE-RIDE INSPECTION pump nozzle pivots easily and in the platform, access panels, and seat are same direction as the handlebar (e.g.: closed and latched. when handlebar is turned to the left, W W A A R R N N I I N N G G the nozzle opening must point to- wards the LH side of watercraft).
  • Page 52 PRE-RIDE INSPECTION Completely retract and lock when not Restart the engine, then stop it by re- used. moving the tether cord from the en- gine cut-off switch. W W A A R R N N I I N N G G W W A A R R N N I I N N G G W W h h e e n n u u s s i i n n g g t t h h e e s s k k i i p p y y l l o o n n , , n n e e v v e e r r c c a a r r r r y y c c a a r r g g o o o o r r a a c c c c e e s s s s o o r r i i e e s s o o n n t t h h e e...
  • Page 53 PRE-RIDE INSPECTION W W h h a a t t t t o o D D o o A A f f t t e e r r L L a a u u n n c c h h i i n n g g ITEM OPERATION t t h h e e W W a a t t e e r r c c r r a a f f t t...
  • Page 54 PRE-RIDE INSPECTION 4. Release the iBR lever, there should not be any reverse thrust. W W A A R R N N I I N N G G A A l l w w a a y y s s e e n n s s u u r r e e p p r r o o p p e e r r i i B B R R s s y y s s t t e e m m o o p p e e r r a a t t i i o o n n b b e e f f o o r r e e t t a a k k i i n n g g t t h h e e w w a a t t e e r r - - c c r r a a f f t t o o u u t t f f o o r r a a r r i i d d e e .
  • Page 55 It is also recommended that an authorized Sea-Doo dealer performs the presea- son preparation of your vehicle. Each visit to your authorized Sea-Doo dealer is a great opportunity for your deal- er to verify if your vehicle is included in any safety campaign. We also urge you to visit your authorized Sea-Doo dealer in a timely manner if you become aware of any safety related campaigns.
  • Page 56 SAFETY INFORMATION This page is intentionally blank SAFETY INFORMATION...
  • Page 57 W W A A T T E E R R C C R R A A F F T T I I N N F F O O R R M M A A T T I I O O N N...
  • Page 58 C C O O N N T T R R O O L L S S Some vehicle safety labels are not shown on illustrations. For information on ve- hicle safety labels, refer to Important On-Product Labels . Some indications, functions and features described in this section may not apply to every PWC model, or may be available as an option.
  • Page 59 CONTROLS T T R R I I X X X X M M O O D D E E L L S S 1. Handlebar 2. Engine START/STOP Button 3. Engine Cut-Off Switch 4. Throttle Lever 5. iBR Lever (intelligent Brake and Reverse) (Models with iBR) 6.
  • Page 60 CONTROLS E E n n g g i i n n e e S S t t a a r r t t i i n n g g a a n n d d S S t t o o p p p p i i n n g g E E n n g g i i n n e e C C u u t t - - O O f f f f S S w w i i t t c c h h Refer to Operating Instructions for The engine cut-off switch is located on...
  • Page 61 You can buy additional tether cords and have the D.E.S.S. keys pro- grammed for your watercraft. A total of ten D. E. S. S. keys can be programmed. To have a key programmed to your watercraft, see your authorized BRP Sea-Doo dealer.
  • Page 62 CONTROLS T T Y Y P P I I C C A A L L 1. MODE button 1. Lever rest position 2. 25% stroke required to activate iBR R R o o t t a a x x 9 9 0 0 0 0 A A C C E E - - 6 6 0 0 functions It is used to scroll through the multi- At speeds below 7 km/h (5 MPH), pull-...
  • Page 63 M M U U L L T T I I F F U U N N C C T T I I O O N N G G A A U U G G E E ( ( L L C C D D ) ) The multifunction gauge (LCD) is lo- cated above the glove box.
  • Page 64 Sea-Doo dealer, C C h h e e c c k k E E n n g g i i n n e e I I n n d d i i c c a a t t o o r r...
  • Page 65 G G P P S S A A c c t t i i v v e e I I n n d d i i c c a a t t o o r r ( ( I I f f E E q q u u i i p p p p e e d d ) ) ABOARD SEA-DOO scrolling mes- sage will appear for a few seconds.
  • Page 66 MULTIFUNCTION GAUGE (LCD) – RPM – HOUR D D i i s s p p l l a a y y O O p p t t i i o o n n D D e e s s c c r r i i p p t t i i o o n n S S p p e e e e d d The SPEED can be displayed in km/h or MPH depending on the unit of...
  • Page 67 E E Q Q U U I I P P M M E E N N T T Illustrations may not be accurate for Some vehicle safety labels are not every model and are only provided as shown on illustrations. For information a visual guide.
  • Page 68 EQUIPMENT 1. Glove Box 2. Safety Equipment Kit Storage Compartment 3. Storage (Convenience Package) 4. Seat 5. Passenger Handholds 6. Boarding Step (Convenience Package) 7. Boarding Platform 8. Front and Rear Eyelet 9. Bilge Drain Plug 10. Sponsons 11. Rear Footrests (Trixx Models) 12.
  • Page 69 EQUIPMENT kit or emergency kit only (not supplied To open the storage bin front cover, with vehicle). release the lid hooks on each side. Al- ways close and latch cover when riding. N N O O T T I I C C E E T T h h i i s s a a r r e e a a i i s s n n o o t t i i n n t t e e n n d d e e d d f f o o r r g g e e n n - - e e r r a a l l s s t t o o r r a a g g e e .
  • Page 70 EQUIPMENT To install the seat, position the seat in place and push the seat forward until the latch clicks. Pull up on the rear portion of the seat to ensure it is properly latched. P P a a s s s s e e n n g g e e r r H H a a n n d d h h o o l l d d s s The seat strap provides a handhold for a passenger to hold on to when riding.
  • Page 71 EQUIPMENT T T Y Y P P I I C C A A L L 1. Boarding step B B O O A A R R D D I I N N G G S S T T E E P P H H E E L L D D D D O O W W N N F F O O R R...
  • Page 72 EQUIPMENT F F R R O O N N T T E E Y Y E E L L E E T T T T Y Y P P I I C C A A L L - - 2 2 U U P P M M O O D D E E L L S S 1.
  • Page 73 EQUIPMENT R R e e a a r r F F o o o o t t r r e e s s t t s s ( ( T T r r i i x x x x M M o o d d e e l l s s ) ) Angled footrests used to enhance control when purposely raising the bow.
  • Page 74 EQUIPMENT When the P P l l a a y y / / P P a a u u s s e e / / P P o o w w e e r r button pressed, system will powered. B B l l u u e e t t o o o o t t h h P P a a i i r r i i n n g g M M o o d d e e - When the unit is powered On, the system will au- tomatically try to pair with the last con-...
  • Page 75 EQUIPMENT A A u u d d i i o o C C o o n n t t r r o o l l s s S S t t a a t t e e A A u u d d i i o o F F e e e e d d b b a a c c k k V V i i s s u u a a l l F F e e e e d d b b a a c c k k Power ON Fade in...
  • Page 76 EQUIPMENT connected to a 110V household elec- trical outlet to be charged. N N O O T T I I C C E E U U s s e e o o n n l l y y t t h h e e s s u u p p p p l l i i e e d d c c h h a a r r g g i i n n g g a a d d a a p p t t e e r r t t o o c c h h a a r r g g e e t t h h e e a a u u d d i i o o s s y y s s t t e e m m .
  • Page 77 B B R R E E A A K K - - I I N N P P E E R R I I O O D D O O p p e e r r a a t t i i o o n n D D u u r r i i n n g g B B r r e e a a k k - - I I n n P P e e r r i i o o d d A break-in period of 5 operating hours is recommended before running the...
  • Page 78 O O P P E E R R A A T T I I N N G G I I N N S S T T R R U U C C T T I I O O N N S S B B o o a a r r d d i i n n g g t t h h e e W W a a t t e e r r c c r r a a f f t t As with any watercraft, boarding should be done carefully.
  • Page 79 OPERATING INSTRUCTIONS N N O O T T I I C C E E S S t t a a r r t t i i n n g g t t h h e e e e n n g g i i n n e e o o r r r r i i d d i i n n g g t t h h e e w w a a t t e e r r c c r r a a f f t t i i n n s s h h a a l l l l o o w w e e r r w w a a t t e e r r m m a a y y d d a a m m a a g g e e t t h h e e i i m m p p e e l l l l e e r r o o r r o o t t h h e e r r j j e e t t p p u u m m p p c c o o m m p p o o n n e e n n t t s s .
  • Page 80 OPERATING INSTRUCTIONS T T Y Y P P I I C C A A L L 3. Using the other hand, take hold of the edge of the boarding platform, then pull yourself up so that you 6. Take hold of the seat strap to help can knee onto the boarding step.
  • Page 81 OPERATING INSTRUCTIONS 2. The passenger then climbs onto the watercraft while the operator maintains balance by sitting as close as possible to the console. 3. The passenger must sit astride the seat and maintain a firm grip of a handhold or the waist of the per- son in front of them.
  • Page 82 OPERATING INSTRUCTIONS H H o o w w t t o o S S t t o o p p t t h h e e E E n n g g i i n n e e N N O O T T I I C C E E E E n n s s u u r r e e t t h h e e r r e e i i s s a a t t l l e e a a s s t t 9 9 0 0 c c m m ( ( 3 3 W W A A R R N N I I N N G G f f t t ) ) o o f f w w a a t t e e r r u u n n d d e e r r t t h h e e l l o o w w e e s s t t r r e e a a r r...
  • Page 83 OPERATING INSTRUCTIONS H H o o w w t t o o S S t t e e e e r r t t h h e e W W a a t t e e r r c c r r a a f f t t Reduce speed and avoid sharp turns.
  • Page 84 OPERATING INSTRUCTIONS H H o o w w t t o o E E n n g g a a g g e e N N e e u u t t r r a a l l To engage forward thrust from re- verse, release the iBR lever while ap- ( ( M M o o d d e e l l s s w w i i t t h h i i B B R R ) ) plying throttle moderately.
  • Page 85 OPERATING INSTRUCTIONS h4 MPH may be obtained in reverse depending on conditions. W W A A R R N N I I N N G G O O n n l l y y u u s s e e r r e e v v e e r r s s e e a a t t s s l l o o w w s s p p e e e e d d a a n n d d f f o o r r t t h h e e s s h h o o r r t t e e s s t t t t i i m m e e p p o o s s s s i i b b l l e e .
  • Page 86 OPERATING INSTRUCTIONS The braking function can only be en- W W A A R R N N I I N N G G gaged during forward operation at or S S t t o o p p p p i i n n g g d d i i s s t t a a n n c c e e w w i i l l l l v v a a r r y y d d e e - - above the threshold speed of 7 km/h4 p p e e n n d d i i n n g g o o n n i i n n i i t t i i a a l l s s p p e e e e d d , , l l o o a a d d , , MPH.
  • Page 87 OPERATING INSTRUCTIONS are recommended, it is an excellent W W A A R R N N I I N N G G opportunity to become familiar with I I t t i i s s i i m m p p o o r r t t a a n n t t t t o o i i n n f f o o r r m m o o t t h h e e r r o o p p - - trim adjustment and its effects.
  • Page 88 OPERATING INSTRUCTIONS V V T T S S S S e e t t t t i i n n g g s s G G u u i i d d e e l l i i n n e e s s S S e e t t t t i i n n g g U U s s e e Obtain neutral...
  • Page 89 OPERATING INSTRUCTIONS G G e e n n e e r r a a l l O O p p e e r r a a t t i i n n g g R R e e c c o o m m m m e e n n d d a a t t i i o o n n s s N N O O T T I I C C E E C C o o m m b b u u s s t t i i o o n n e e n n g g i i n n e e s s n n e e e e d d a a i i r r t t o o o o p p e e r r a a t t e e ;...
  • Page 90 OPERATING INSTRUCTIONS W W A A R R N N I I N N G G W W A A R R N N I I N N G G W W h h e e n n c c r r o o s s s s i i n n g g w w a a k k e e s s o o r r w w a a v v e e s s , , A A l l w w a a y y s s p p r r a a c c t t i i c c e e b b r r a a k k i i n n g g i i n n o o p p e e n n s s l l o o w w d d o o w w n n .
  • Page 91 OPERATING INSTRUCTIONS W W A A R R N N I I N N G G D D i i r r e e c c t t i i o o n n a a l l c c o o n n t t r r o o l l i i s s r r e e d d u u c c e e d d w w h h e e n n t t h h e e t t h h r r o o t t t t l l e e i i s s r r e e l l e e a a s s e e d d a a n n d d / / o o r r w w h h e e n n e e n n g g i i n n e e i i s s o o f f f f .
  • Page 92 O O P P E E R R A A T T I I N N G G M M O O D D E E S S ( ( R R O O T T A A X X 9 9 0 0 0 0 A A C C E E - - 9 9 0 0 ) ) T T o o u u r r i i n n g g M M o o d d e e 1.
  • Page 93 OPERATING MODES (ROTAX 900 ACE - 90) MESSAGE DISPLAYED MESSAGE DISPLAYED SPORT MODE ACTIVATED SPORT MODE - RETURN TO IDLE TO ACTIVATE N N O O T T E E : : Release the throttle. Once the en- After a few seconds, the gauge will re- gine has returned to idle, SPORT vert to its normal display.
  • Page 94 OPERATING MODES (ROTAX 900 ACE - 90) T T Y Y P P I I C C A A L L 1. MODE button N N O O T T E E : : The following message will scroll in the multifunction display: SPORT MODE DEACTIVATED.
  • Page 95 S S P P E E C C I I A A L L P P R R O O C C E E D D U U R R E E S S J J e e t t P P u u m m p p W W a a t t e e r r I I n n t t a a k k e e a a n n d d M M o o d d e e l l s s e e q q u u i i p p p p e e d d w w i i t t h h t t h h e e i i D D F F s s y y s s t t e e m m I I m m p p e e l l l l e e r r C C l l e e a a n n i i n n g g...
  • Page 96 – – W W a a i i t t a a t t l l e e a a s s t t 5 5 m m i i n n u u t t e e s s . . to an authorized Sea-Doo dealer –...
  • Page 97 SPECIAL PROCEDURES C C a a p p s s i i z z e e d d W W a a t t e e r r c c r r a a f f t t N N O O T T I I C C E E W W h h e e n n t t h h e e w w a a t t e e r r c c r r a a f f t t h h a a s s b b e e e e n n t t u u r r n n e e d d o o v v e e r r 5 5 m m i i n n u u t t e e s s , , d d o o n n o o t t a a t t - - t t e e m m p p t t t t o o c c r r a a n n k k t t h h e e e e n n g g i i n n e e t t o o a a v v o o i i d d...
  • Page 98 . . 3. Bring the watercraft to an author- ized Sea-Doo dealer as soon as possible to have it serviced.
  • Page 99 SPECIAL PROCEDURES 1. Water supply hose Reinstall the LH access cover in the reverse of the removal procedure and lock the knob by turning it 1/4 turn counterclockwise. L L H H A A C C C C E E S S S S C C O O V V E E R R 1.
  • Page 100 SPECIAL PROCEDURES This page is intentionally blank...
  • Page 101 M M A A I I N N T T E E N N A A N N C C E E I I N N F F O O R R M M A A T T I I O O N N...
  • Page 102 Although an authorized Sea-Doo dealer has an in-depth technical knowledge and tools to service your vehicle, the emission-related warranty is not conditioned on the use of an authorized Sea-Doo dealer or any other establishment with which BRP has a commercial relationship.
  • Page 103 MAINTENANCE SCHEDULE E E v v e e r r y y M M o o n n t t h h i i n n S S a a l l t t o o r r D D i i r r t t y y W W a a t t e e r r Spray anticorrosion lubricant to metallic components in engine compartment (every 10 hours in salt water use) Inspect sacrificial anodes...
  • Page 104 MAINTENANCE SCHEDULE E E v v e e r r y y 2 2 Y Y e e a a r r s s o o r r 2 2 0 0 0 0 H H o o u u r r s s o o f f O O p p e e r r a a t t i i o o n n ( ( W W h h i i c c h h e e v v e e r r C C o o m m e e s s F F i i r r s s t t ) ) Replace spark plugs Inspect flame arrestor...
  • Page 105 M M A A I I N N T T E E N N A A N N C C E E P P R R O O C C E E D D U U R R E E S S This section includes instructions for N N O O T T I I C C E E basic maintenance procedures.
  • Page 106 MAINTENANCE PROCEDURES oil additives may not be covered by 4. Wait at least 30 seconds for the oil the BRP Limited Warranty. to settle in the engine. 5. To check level, remove access E E n n g g i i n n e e O O i i l l L L e e v v e e l l cover located on rear of RH side of watercraft turning...
  • Page 107 Sea-Doo dealer, repair shop, or per- b b u u r r n n .
  • Page 108 MAINTENANCE PROCEDURES L L H H A A C C C C E E S S S S C C O O V V E E R R 1. To unlock, turn the knob 1/4 turn clockwise 1. Cold level mark Locate the expansion tank cap.
  • Page 109 Coolant replacement should be per- pushing the ring back down and formed by an authorized Sea-Doo reinstalling the LH side knee pad. dealer. C C e e n n t t r r a a l l B B o o d d y y S S t t e e e e r r i i n n g g A A l l i i g g n n m m e e n n t t 1.
  • Page 110 MAINTENANCE PROCEDURES L L H H A A C C C C E E S S S S C C O O V V E E R R 1. Push tab 1. To unlock, turn the knob 1/4 turn clockwise 2.
  • Page 111 MAINTENANCE PROCEDURES L L H H S S H H O O W W N N 1. Footrest A A l l l l M M o o d d e e l l s s 1. Nut and washer 11.
  • Page 112 MAINTENANCE PROCEDURES 2. Install screws adjacent to align- ment tabs first to ensure alignment tabs remain properly engaged. 1. Self-tapping screws 15. Remove ten M6 nuts and screws from both sides of central body. 1. Screws adjacent to alignment tabs 3.
  • Page 113 MAINTENANCE PROCEDURES install self-tapping screws. Tighten to the recom- mended torque. 1. Self-tapping screws T T Y Y P P I I C C A A L L 1. Rear panel trims T T r r i i x x x x M M o o d d e e l l s s 9.
  • Page 114 MAINTENANCE PROCEDURES B B a a t t t t e e r r y y R R e e m m o o v v a a l l W W A A R R N N I I N N G G T T h h e e B B L L A A C C K K ( ( - - ) ) b b a a t t t t e e r r y y c c a a b b l l e e m m u u s s t t a a l l w w a a y y s s b b e e d d i i s s c c o o n n n n e e c c t t e e d d f f i i r r s s t t a a n n d d r r e e c c o o n n n n e e c c t t e e d d l l a a s s t t .
  • Page 115 MAINTENANCE PROCEDURES B B a a t t t t e e r r y y S S t t o o r r a a g g e e N N O O T T I I C C E E B B a a t t t t e e r r y y s s t t o o r r a a g g e e i i s s c c r r i i t t i i c c a a l l f f o o r r b b a a t t - - t t e e r r y y l l i i f f e e .
  • Page 116 MAINTENANCE PROCEDURES B B a a t t t t e e r r y y V V o o l l t t a a g g e e B B e e l l o o w w 1 1 2 2 . . 8 8 V V a a n n d d A A m m b b i i e e n n t t C C h h a a r r g g i i n n g g A A b b o o v v e e 1 1 1 1 .
  • Page 117 MAINTENANCE PROCEDURES B B a a t t t t e e r r y y M M a a i i n n t t e e n n a a n n c c e e These batteries require little mainte- nance to perform perfectly.
  • Page 118 MAINTENANCE PROCEDURES 3. Using a spark plug socket, release T T i i g g h h t t e e n n i i n n g g T T o o r r q q u u e e the torque applied to the spark plug.
  • Page 119 MAINTENANCE PROCEDURES apply a coating of XPS Lube or Start the engine then immediately equivalent. open the water tap. N N O O T T I I C C E E W W A A R R N N I I N N G G A A l l w w a a y y s s s s t t a a r r t t t t h h e e e e n n g g i i n n e e b b e e f f o o r r e e W W h h e e n n o o p p e e r r a a t t i i n n g g t t h h e e e e n n g g i i n n e e w w h h i i l l e e o o p p e e n n i i n n g g t t h h e e w w a a t t e e r r t t a a p p .
  • Page 120 MAINTENANCE PROCEDURES Sea-Doo dealer to have any damaged part repaired or replaced. W W A A R R N N I I N N G G T T h h e e t t e e t t h h e e r r c c o o r r d d m m u u s s t t a a l l w w a a y y s s b b e e...
  • Page 121 MAINTENANCE PROCEDURES N N O O T T I I C C E E D D o o n n o o t t u u s s e e a a h h i i g g h h e e r r r r a a t t e e d d f f u u s s e e a a s s t t h h i i s s c c a a n n c c a a u u s s e e s s e e v v e e r r e e d d a a m m a a g g e e .
  • Page 122 MAINTENANCE PROCEDURES L L H H A A C C C C E E S S S S C C O O V V E E R R 1. To lock, turn knob turn counterclockwise F F u u s s e e D D e e s s c c r r i i p p t t i i o o n n R R a a t t i i n n g g D D e e s s c c r r i i p p t t i i o o n n F F u u s s e e...
  • Page 123 Sea-Doo dealer. Refer to Maintenance Procedures . C C l l e e a a n n i i n n g g...
  • Page 124 WATERCRAFT CARE Respect the environment by ensuring fuel, oil or cleaning solutions do not drain into the waterways. P P r r o o t t e e c c t t i i o o n n Apply a good quality marine wax to the body.
  • Page 125 S S e e r r v v i i c c e e P P r r o o d d u u c c t t be serviced by an authorized Sea-Doo dealer, repair shop, or person of your...
  • Page 126 The following hose can be fabricated density test should be performed by to ease draining procedure. an authorized Sea-Doo dealer. Refer to Maintenance Schedule . N N O O T T I I C C E E I I m m p p r r o o p p e e r r a a n n t t i i f f r r e e e e z z e e d d e e n n s s i i t t y y m m a a y y...
  • Page 127 E E v v e e r r y y Y Y e e a a r r o o r r 1 1 0 0 0 0 H H o o u u r r s s table. Preseason maintenance preparation may be performed by an authorized Sea-Doo dealer, repair shop or per- son of your own choosing.
  • Page 128 STORAGE AND PRESEASON PREPARATION This page is intentionally blank...
  • Page 129 T T E E C C H H N N I I C C A A L L I I N N F F O O R R M M A A T T I I O O N N...
  • Page 130 W W A A T T E E R R C C R R A A F F T T I I D D E E N N T T I I F F I I C C A A T T I I O O N N The main components of the water- craft (engine and hull) are identified by different serial numbers.
  • Page 131 R R F F D D . . E E . . S S . . S S . . K K E E Y Y This device complies with FCC Part 15 and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer- ence that may cause undesired operation of the device.
  • Page 132 RF D.E.S.S. KEY CISPR 25:(2016); conducted emission Article 3.1b CISPR 25:(2016); radiated emission ISO 11452-2 (2004); radiated electromagnetic field immunity Spectrum usage efficiency Article 3.2 ETSI EN 300 330 V2.1.1 (2017-2)
  • Page 133 M M a a n n u u f f a a c c t t u u r r e e r r ' ' s s R R e e s s p p o o n n s s i i b b i i l l i i t t y y All 1999 and more recent Sea-Doo watercraft manufactured by BRP are...
  • Page 134 E E A A C C D D E E C C L L A A R R A A T T I I O O N N O O F F C C O O N N F F O O R R M M I I T T Y Y Left blank for Eurasian Conformity mark where applicable...
  • Page 135 E E C C - - D D E E C C L L A A R R A A T T I I O O N N O O F F C C O O N N F F O O R R M M I I T T Y Y...
  • Page 136 EC-DECLARATION OF CONFORMITY This page is intentionally blank...
  • Page 137 T T E E C C H H N N I I C C A A L L S S P P E E C C I I F F I I C C A A T T I I O O N N S S...
  • Page 138 T T E E C C H H N N I I C C A A L L S S P P E E C C I I F F I I C C A A T T I I O O N N S S Engine Type Rotax 903...
  • Page 139 TECHNICAL SPECIFICATIONS Battery 12 V Propulsion Propulsion system Sea-Doo ® jet pump Axial flow, single stage. Type Large hub with double row ball Jet pump bearings Material Aluminum Impeller Stainless steel Type Transmission Direct drive Dimensions 279 cm 2-UP (110 in)
  • Page 140 TECHNICAL SPECIFICATIONS 1.6 l Glove box (.42 gal(liq.,US)) Rear under-seat 0.5 l storage compartment (.13 gal(liq.,US)) (3-UP models) 160 kg 2-UP models (352 lb) Load limit (passenger) 205 kg 3-UP models (450 lb) Fluids Regular unleaded Type Fuel Requirements Refer to 87 Pump Posted AKI (RON+MON)/2 (Inside North America)
  • Page 141 TECHNICAL SPECIFICATIONS Declared power as per ISO 8665 at propeller-shaft. Quantity required when changing engine oil. Total quantity for a dry engine is 3.4 l (3.6 qt(liq.,US)). N N O O T T E E : : BRP reserves the right to make changes in design and specifications and/or to make additions to, or improvements in its products without imposing any obliga- tion upon itself to install them on its products previously manufactured.
  • Page 142 TECHNICAL SPECIFICATIONS This page is intentionally blank...
  • Page 143 T T R R O O U U B B L L E E S S H H O O O O T T I I N N G G...
  • Page 144 7. F F a a u u l l t t y y s s e e n n s s o o r r o o r r E E C C M M . . – Seek service from an authorized Sea-Doo dealer, repair shop, or person of your own choosing for maintenance, repair, or replacement.
  • Page 145 5. E E n n g g i i n n e e m m a a n n a a g g e e m m e e n n t t s s y y s s t t e e m m f f a a u u l l t t d d e e t t e e c c t t e e d d ( ( c c h h e e c c k k e e n n g g i i n n e e p p i i l l o o t t l l a a m m p p i i s s O O N N ) ) . . – Seek service from an authorized Sea-Doo dealer, repair shop, or person of your own choosing for maintenance, repair, or replacement.
  • Page 146 1. O O i i l l l l e e v v e e l l t t o o o o h h i i g g h h . . – Seek service from an authorized Sea-Doo dealer, repair shop, or person of your own choosing for maintenance, repair, or replacement.
  • Page 147 5. E E n n g g i i n n e e o o i i l l l l e e v v e e l l t t o o o o h h i i g g h h . . – Seek service from an authorized Sea-Doo dealer, repair shop, or person of your own choosing for maintenance, repair, or replacement.
  • Page 148 – Remove tether cord, wait four minutes, reinstall key and check iBR light to ensure fault is cleared. – Refer to an authorized Sea-Doo dealer if fault persists or reoccurs frequently. i i B B R R W W I I L L L L N N O O T T R R E E T T U U R R N N T T O O N N E E U U T T R R A A L L P P O O S S I I T T I I O O N N ( ( I I B B R R I I N N D D I I C C A A T T O O R R L L I I G G H H T T O O F F F F ) ) 1.
  • Page 149 1. B B a a i i l l e e r r s s y y s s t t e e m m m m a a l l f f u u n n c c t t i i o o n n . . – Have system inspected by an authorized Sea-Doo dealer.
  • Page 150 When a minor or transient fault oc- then choose to call his authorized curs, the fault message and beeper Sea-Doo dealer to pass on the fault will cease automatically if the condi- code. The dealer will then advise the tion that caused the fault does not ex- operator on the steps to take to solve ist anymore.
  • Page 151 Light is steady with a buzzer and a IBR MODULE check engine light: iBR system fault ERROR (refer to an authorized Sea-Doo dealer) Light is flashing: iBR system fault (refer to an authorized Sea-Doo dealer) Light is steady with no buzzer:...
  • Page 152 MONITORING SYSTEM N N O O T T I I C C E E R R u u n n n n i i n n g g e e n n g g i i n n e e w w i i t t h h l l o o w w o o i i l l p p r r e e s s s s u u r r e e m m a a y y s s e e v v e e r r e e l l y y d d a a m m a a g g e e t t h h e e e e n n g g i i n n e e . .
  • Page 153 I I m m p p r r o o p p e e r r o o p p e e r r a a t t i i o o n n o o f f E E C C M M o o r r d d e e f f e e c c t t i i v v e e w w i i r r i i n n g g h h a a r r n n e e s s s s . . Seek service from an authorized Sea-Doo dealer, repair shop, or person of your own choosing for maintenance, repair, or replacement.
  • Page 154 L L o o w w o o i i l l p p r r e e s s s s u u r r e e . . Turn off engine as soon as possible. Check oil level 2 second beeps and refill. Seek service from an authorized Sea-Doo dealer, repair shop, or person of your own choosing for maintenance, repair, or replacement. Please...
  • Page 155 W W A A R R R R A A N N T T Y Y...
  • Page 156 This limited warranty will become null and void if: 1. (1) The Sea-Doo personal watercraft was used for racing or any other com- petitive activity, at any point, even by a previous owner; or 2.
  • Page 157 3. For emission-related components; please also refer to the US EPA Emis- sion-related warranty contained herein. 4. For Sea-Doo personal watercrafts produced by BRP for sale in the State of California or New York that are originally sold to a resident or subsequently...
  • Page 158 BRP LIMITED WARRANTY – USA AND CANADA: 2022 SEA-DOO PERSONAL WATERCRAFT – The 2022 Sea-Doo personal watercraft must be purchased as new and un- used by its first owner from a BRP dealer authorized to distribute Sea-Doo personal watercraft in the country in which the sale occurred;...
  • Page 159 BRP LIMITED WARRANTY – USA AND CANADA: 2022 SEA-DOO PERSONAL WATERCRAFT Sea-Doo Distributor/Dealer receives a proof that the former owner agreed to the transfer of ownership, in addition to the coordinates of the new owner. 9 9 . . C C O O N N S S U U M M E E R R A A S S S S I I S S T T A A N N C C E E In the event of a controversy or a dispute in connection with this BRP limited war- ranty, BRP suggests that you try to resolve the issue at the dealership level.
  • Page 160 BRP. For all emission-related warranty claims, BRP is limiting the diagnosis and repair of emission-related parts to the authorized Sea-Doo dealers, unless for emer- gency repairs as required by item 2 of the following list.
  • Page 161 US EPA EMISSION-RELATED WARRANTY 1. For exhaust emissions, emission-related components include any engine parts related to the following systems: – Air-induction system – Fuel system – Ignition system – Exhaust gas recirculation systems 2. The following parts are also considered emission-related components for ex- haust emissions: –...
  • Page 162 US EPA EMISSION-RELATED WARRANTY If you have any questions regarding your warranty rights and responsibilities or for the name and location of the nearest authorized BRP Dealer you should con- tact BRP by filling out the customer contact form at www.brp.com or contact BRP by mail at one of the addresses listed under the CONTACT US section of this guide, or call at 1-888-272-9222...
  • Page 163 C C A A L L I I F F O O R R N N I I A A E E V V A A P P O O R R A A T T I I V V E E E E M M I I S S S S I I O O N N S S C C O O N N T T R R O O L L S S Y Y S S T T E E M M W W A A R R R R A A N N T T Y Y S S T T A A T T E E M M E E N N T T Y Y o o u u r r W W a a r r r r a a n n t t y y R R i i g g h h t t s s a a n n d d O O b b l l i i g g a a t t i i o o n n s s The California Air Resources Board is pleased to explain the evaporative emis-...
  • Page 164 CALIFORNIA EVAPORATIVE EMISSIONS CONTROL SYSTEM WARRANTY STATEMENT as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 calendar days. If you have question regarding your warranty coverage, you should contact Bombardier Recreational Products at 1-888-272-9222.
  • Page 165 Select emission control parts of your 2022 Sea-Doo personal watercrafts are warranted from the date of deliv- ery to the first retail consumer for a period of 4 years, or for 250 hours of use, whichever occurs first.
  • Page 166 CALIFORNIA AND NEW YORK EMISSION CONTROL WARRANTY STATEMENT FOR MODEL YEAR 2022 SEA-DOO PERSONAL WATERCRAFT Throttle body Throttle body seal Fuel rail Intake manifold seal Fuel injectors Wire harness and connectors Fuel pressure regulator Fuel filter Fuel pump The emission warranty covers damage to other engine components that is caused by the failure of a warranted part.
  • Page 167 O O w w n n e e r r ’ ’ s s W W a a r r r r a a n n t t y y R R e e s s p p o o n n s s i i b b i i l l i i t t i i e e s s As the owner of a 2022 Sea-Doo personal watercraft, you are responsible for the performance of the required maintenance listed in your Operator’s Guide.
  • Page 168 CALIFORNIA AND NEW YORK EMISSION CONTROL WARRANTY STATEMENT FOR MODEL YEAR 2022 SEA-DOO PERSONAL WATERCRAFT O O n n e e S S t t a a r r – – L L o o w w E E m m i i s s s s i i o o n n The one-star label identifies personal watercraft, outboard, stern drive and in- board engines that meet the Air Resources Board’s Personal Watercraft and Out-...
  • Page 169 P P R R O O D D U U C C T T S S P P U U R R C C H H A A S S E E D D I I N N A A U U S S T T R R A A L L I I A A S S E E E E C C L L A A U U S S E E 4 4 B B E E L L O O W W ) ) . . Neither the Sea-Doo distributor/dealer nor any other person has been authorized...
  • Page 170 BRP INTERNATIONAL LIMITED WARRANTY: 2022 SEA-DOO PERSONAL WATERCRAFT 3 3 . . E E X X C C L L U U S S I I O O N N S S – – A A R R E E N N O O T T W W A A R R R R A A N N T T E E D D...
  • Page 171 This warranty coverage is available o o n n l l y y if e e a a c c h h of the following conditions has been fulfilled: – The 2022 Sea-Doo personal watercraft must be purchased as new and un- used by its first owner from a Sea-Doo distributor/dealer authorized to distrib- ute Sea-Doo personal watercrafts in the country in which the sale occurred;...
  • Page 172 No claim of breach of warranty shall be cause for cancellation or rescission of the sale of the Sea-Doo personal watercraft to the owner. You may have other legal rights which may vary from country to country.
  • Page 173 G G A A L L R R I I G G H H T T S S W W H H I I C C H H M M A A Y Y V V A A R R Y Y F F R R O O M M C C O O U U N N T T R R Y Y T T O O C C O O U U N N T T R R Y Y . . Neither the Sea-Doo distributor/dealer nor any other person has been authorized...
  • Page 174 BRP LIMITED WARRANTY FOR THE EUROPEAN ECONOMIC AREA, THE COMMONWEALTH OF THE INDEPENDENT STATES AND TURKEY: 2022 SEA-DOO PERSONAL WATERCRAFT 3 3 . . E E X X C C L L U U S S I I O O N N S S – – A A R R E E N N O O T T W W A A R R R R A A N N T T E E D D...
  • Page 175 BRP’s responsibility is limited to making the required repairs or replacements of parts. No claim of breach of warranty shall be cause for cancellation or rescission of the sale of the Sea-Doo personal watercraft to the owner. You may have other legal rights which may vary from country to country.
  • Page 176 If the ownership of a product is transferred during the warranty coverage period, this warranty shall also be transferred and be valid for the remaining coverage period provided BRP or an authorized Sea-Doo distributor/dealer receives a proof that the former owner agreed to the transfer of ownership, in addition to the coordinates of the new owner.
  • Page 177 M M A A I I N N T T E E N N A A N N C C E E R R E E C C O O R R D D S S Send photocopy of maintenance record to BRP if needed. Predelivery Signature/Print: Serial number:...
  • Page 178 MAINTENANCE RECORDS Service Signature/Print: Mileage / km: Hours: Date: Dealer no.: Notes: For maintenance schedule, refer to Maintenance Information section of this operator’s guide Service Signature/Print: Mileage / km: Hours: Date: Dealer no.: Notes: For maintenance schedule, refer to Maintenance Information section of this operator’s guide Service Signature/Print: Mileage / km:...
  • Page 179 MAINTENANCE RECORDS Service Signature/Print: Mileage / km: Hours: Date: Dealer no.: Notes: For maintenance schedule, refer to Maintenance Information section of this operator’s guide...
  • Page 180 MAINTENANCE RECORDS This page is intentionally blank...
  • Page 181 C C U U S S T T O O M M E E R R I I N N F F O O R R M M A A T T I I O O N N...
  • Page 182 P P R R I I V V A A C C Y Y I I N N F F O O R R M M A A T T I I O O N N BRP wishes to inform you that your coordinates will be used for safety and war- ranty related purposes.
  • Page 183 C C O O N N T T A A C C T T U U S S www.brp.com 10101 Science Drive Sturtevant, Wisconsin 53177 A A s s i i a a U.S.A. Room 4609, Tower 2, Grand Gateway 3 Hong Qiao O O c c e e a a n n i i a a Road Shanghai, China 200020...
  • Page 184 BRP by either: – Notifying an authorized Sea-Doo dealer. – N N o o r r t t h h A A m m e e r r i i c c a a O O n n l l y y : : calling at 1 888 272-9222.
  • Page 185 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 186 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank...
  • Page 187 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 188 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank...
  • Page 189 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 190 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 191 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 192 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 193 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 194 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 195 CHANGE OF ADDRESS/OWNERSHIP WATERCRAFT Model No. HULL Identification Number (H.I.N.) ENGINE Identification Number (E.I.N.) OWNER: Purchase Date YEAR MONTH Warranty Expiry Date YEAR MONTH To be completed by the authorized Sea-Doo dealer at the time of the sale.
  • Page 196 WARNING Before you operate this vehicle, read this Operator’s Guide, all on-product safety la- bels and watch the safety video. www.brp.com S S K K I I - - D D O O O O ® ® S S E E A A - - D D O O O O ®...

This manual is also suitable for:

Spark 900 ace 60Spark 900 ace 90Spark trixx

Table of Contents